OWC 2R9D42R816GB 16GB DDR4 2933MHz ECC RDIMM memory upgrade
- 16GB
- 288-Pin DDR4 ECC RD…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
OWC
16 GB DDR4 ECC registered DIMM running at 2933 MHz CL21 for Supermicro X11 server boards
This 16GB DDR4 2933MHz ECC Registered DIMM is built for Supermicro X11 series motherboards including the X11DPT-L, X11DPT-PS, X11DPU, X11DPX-T and X11DSC+. It suits administrators expanding memory in compatible workstations, servers or NAS systems that require registered error-correcting modules. It will not work in standard desktop computers or alongside unbuffered memory.
Operating at 1.2V, the module runs at standard DDR4 voltage without a heat spreader, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping maintain signal integrity at 2933MHz speeds with CL21 latency. Backward compatibility with 2133MHz, 2400MHz and 2666MHz systems allows flexible deployment across mixed-speed configurations.
The 288-pin RDIMM uses a 2Rx8 rank organisation and conforms to JEDEC and RoHS standards for reliable insertion into server DIMM slots. OWC tests every module in-house before shipment. Buyers needing unbuffered ECC or non-ECC memory for consumer platforms cannot use this product.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R816GB |
| Capacity | 16GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X11DPT-L Supermicro Motherboard X11DPT-PS Supermicro Motherboard X11DPU Supermicro Motherboard X11DPX-T Supermicro Motherboard X11DSC+ |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
Align the notch on the module with the slot key, press firmly until both ejector clips click shut, then verify in BIOS that the 2933MHz speed and ECC registered mode are detected.
No routine maintenance is required; if a correctable error count rises or the module fails, replace it with another 2Rx8 1.2V DDR4 2933 RDIMM to keep ECC protection intact.
The CL21 latency at 2933MHz sets the timing ceiling, so sustained bandwidth is capped by the 23400 MT/s data rate and the registered buffer's command delay.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?