OWC
OWC 2TB (8x256GB) DDR4 2933 PC4-23400 CL21 ECC LRDIMM Kit
Eight 256 GB DDR4-2933 ECC load-reduced DIMMs for Supermicro X11 server and workstation boards
Capacity 2TB (8 x 256GB)
- 2 TB total capacity from eight 256 GB modules
- ECC load-reduced design for server and workstation reliability
- DDR4 2933 MHz CL21 with 1.2 V operation
- JEDEC and RoHS compliant for warranty-safe upgrades
- Backward compatible with 2133, 2400 and 2666 MHz systems
2 TB DDR4 ECC LRDIMM Kit for Supermicro Servers
This 2 TB kit contains eight 256 GB DDR4 2933 PC4-23400 CL21 ECC load-reduced DIMMs built for Supermicro motherboards X11DPD-L, X11DPD-M25, X11DPFF-SNR, X11QPL and X11SPA-T. It is designed for servers, workstations and NAS systems that require registered ECC memory with a load-reduced design. The modules operate at 1.2 V and conform to JEDEC and RoHS standards. Desktop computers and consumer platforms cannot use this memory.
Thermals Noise and Power Draw in Normal Use
Each module runs at the standard DDR4 voltage of 1.2 V, keeping power draw low for high-density server configurations. The load-reduced architecture reduces electrical load on the memory controller, which helps maintain stable thermals under sustained workloads. No active cooling is included, so system airflow must be sufficient for dense DIMM populations. Acoustic output is determined by the host chassis fans rather than the memory itself.
8Rx4 Organisation Decides Compatibility
The 8Rx4 rank structure is the single specification that determines whether this kit will work in a given board. Only platforms that support eight-rank load-reduced DIMMs at 288 pins can accept these modules. Mixing with unbuffered or standard registered ECC DIMMs is not supported. Backward compatibility covers 2133, 2400 and 2666 MHz speeds, but the rank organisation must match the motherboard requirements.
Punti di forza
- 2 TB total capacity from eight 256 GB modules
- ECC load-reduced design for server and workstation reliability
- DDR4 2933 MHz CL21 with 1.2 V operation
- JEDEC and RoHS compliant for warranty-safe upgrades
- Backward compatible with 2133, 2400 and 2666 MHz systems
Caratteristiche tecniche
Nessuna caratteristica ancora pubblicata per questo articolo.
Altre versioni di questo modello
altri 5 nella stessa gamma
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
OWC 2TB (8×256GB) DDR4 2933 PC4-23400 CL21 8Rx4 288-pin 1.2V ECC LRDIMM memory upgrade
OWC 2TB (8x256GB) DDR4 3200 PC4-25600 CL22 8Rx4 288-pin 1.2V ECC Load Reduced LRDIMM Memory Upgrade Kit
OWC 2TB 8x256GB DDR4 2933 PC4-23400 CL21 ECC LRDIMM memory upgrade
Domande su questo articolo
How do I install the 288-pin DDR4 LRDIMM modules in my Supermicro X11DPD-L motherboard and what step is commonly missed?
Power down, open the chassis, align each 288-pin module with the slot key and press firmly until both retention clips click; the step often missed is confirming the BIOS recognises all eight 256 GB modules at 2933 MHz after first boot.
What maintenance or replacement will the ECC load-reduced DDR4 kit need over its service life?
No scheduled maintenance is required; if a module fails the limited lifetime warranty covers replacement, and the ECC circuitry continues correcting single-bit errors without user intervention.
What limit appears first when the 2 TB kit runs sustained workloads at 1.2 V?
The memory controller’s maximum supported speed of 2933 MHz (PC4-23400) is the first ceiling; the modules will down-clock to 2666, 2400 or 2133 MHz if the platform cannot sustain the rated frequency.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)








