Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR3 ECC RDIMM modules with gold contacts

OWC

OWC 32GB (2x16GB) DDR3 1333 ECC RDIMM Supermicro SuperBlade 7126T 7226T memory upgrade

SKU CH-A8T6-V6901

ECC registered DDR3 kit adds 32 GB across two 16 GB modules at 1333 MHz for Supermicro SuperBlade 7126T and 7226T servers

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2 × 16 GB) expands SuperBlade capacity
  • DDR3 1333 MHz CL9 matches system timing specs
  • 5 V 240-pin RDIMM fits SuperBlade 7126T and 7226T
  • Replaces Supermicro MEMDR316LSL05ER13 for validated compatibility

ECC Registered DDR3 for SuperBlade 7126T 7226T

This OWC kit supplies 32GB (2 x 16GB) of DDR3 1333 PC3-10600 CL9 ECC Registered RDIMM memory. The modules run at 1.5V with a 2Rx4 organisation and fit the 240-pin slots in Supermicro SuperBlade 7126T Series and 7226T Series servers. They are built for workstation and server workloads that require error correction and registered signalling.

Check your blade accepts DDR3 ECC RDIMM

Verify that the target blade uses DDR3 1333 registered ECC DIMMs and that the memory controller supports 2Rx4 modules at 1.5V. The kit will not work in systems that require unbuffered or non-ECC memory. Confirm the blade has free 240-pin DIMM slots and that the BIOS recognises the Supermicro part number MEMDR316LSL05ER13 as a supported replacement.

Suits admins upgrading SuperBlade 7126T 7226T

Administrators extending the life of SuperBlade 7126T Series or 7226T Series infrastructure can install this matched pair directly. Builders needing unbuffered desktop memory, different speeds, higher densities or alternative form factors should select a different product.

Punti di forza

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2 × 16 GB) expands SuperBlade capacity
  • DDR3 1333 MHz CL9 matches system timing specs
  • 5 V 240-pin RDIMM fits SuperBlade 7126T and 7226T
  • Replaces Supermicro MEMDR316LSL05ER13 for validated compatibility

Caratteristiche tecniche

BrandOWC
Part Number1R3D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 7126T Series
Supermicro SuperBlade 7226T Series

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

What comes in the 32GB kit and is anything else required?

The kit contains two 16GB DDR3 1333 ECC registered RDIMM modules. No additional parts are needed for installation in compatible Supermicro SuperBlade 7126T or 7226T systems.

How do I choose between the 7126T and 7226T versions?

This single 32GB kit is validated for both Supermicro SuperBlade 7126T Series and 7226T Series. Select the kit that matches your server model; no separate version exists.

What does the PC3-10600 1333MHz rating mean in my SuperBlade?

PC3-10600 indicates a peak transfer rate of 10600 MB/s at 1333MHz. The modules run at 1.5V with CL9 latency and 2Rx4 organisation, providing registered ECC stability for server workloads.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.