Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green circuit board with gold edge connector and black memory chips

OWC

OWC 4GB DDR3 1066 PC3-8500 CL7 2Rx8 204-pin SODIMM memory upgrade

SKU CH-71E7-BPJ6S

4GB DDR3 1066 CL7 SODIMM module upgrades HP 6000 Pro AIO, 6005 Pro Ultra-Slim and 8200 Elite Ultra-Slim systems

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.5V
  • ECCNo
  • 4 GB capacity lets you run more applications simultaneously
  • DDR3 1066 speed with CL7 latency delivers responsive system performance
  • JEDEC-standard 1.5 V unbuffered design ensures broad compatibility
  • 204-pin SODIMM form factor fits HP 6000 Pro AIO, 6005 Pro Ultra-Slim and 8200 Elite Ultra-Slim
  • Single 2Rx8 module simplifies installation for a quick DIY upgrade

Targeted HP Upgrade

This 4GB DDR3 SODIMM runs at 1066MHz with CL7 latency and 1.5V operation. It is built specifically for the HP 6000 Pro AIO, 6005 Pro Ultra-Slim and 8200 Elite Ultra-Slim systems. The 204-pin unbuffered module installs directly into the factory memory slot.

Narrow Compatibility

It suits owners of the three listed HP models who need a single 4GB stick to fill an empty slot or replace a failed module. Builders working on any other laptop, desktop or server platform should look elsewhere because the SPD profile and physical keying are tuned for those specific HP ultra-slim chassis.

JEDEC Assurance

The module carries full JEDEC and RoHS compliance so it will not void the original system warranty. No extra cables, brackets or software discs are bundled; the upgrade relies on the existing BIOS to recognise the new capacity automatically.

Punti di forza

  • 4 GB capacity lets you run more applications simultaneously
  • DDR3 1066 speed with CL7 latency delivers responsive system performance
  • JEDEC-standard 1.5 V unbuffered design ensures broad compatibility
  • 204-pin SODIMM form factor fits HP 6000 Pro AIO, 6005 Pro Ultra-Slim and 8200 Elite Ultra-Slim
  • Single 2Rx8 module simplifies installation for a quick DIY upgrade

Caratteristiche tecniche

BrandOWC
Part Number8S5D32R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP 6000 Pro AIO
HP 6005 Pro Ultra-Slim
HP 8200 Elite Ultra-Slim

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Does my HP 6000 Pro AIO need a free 204-pin SODIMM slot to install this 4GB DDR3 1066 module?

Yes, the module uses a 204-pin DDR3 SODIMM form factor and requires an available SODIMM slot in the HP 6000 Pro AIO, HP 6005 Pro Ultra-Slim or HP 8200 Elite Ultra-Slim.

Can I keep my existing PC3-8500 CL7 memory and add this 2Rx8 1.5V stick without changing BIOS settings?

The module follows JEDEC-standard DDR3 1066 PC3-8500 CL7 timings at 1.5V, so it will run alongside identical-spec memory at the same speed and voltage without manual BIOS changes.

How can I confirm the system recognises the full 4GB capacity after installing this SODIMM?

Check the BIOS memory summary or the operating system's system information; both should report the additional 4GB DDR3 module at 1066 MHz with CL7 latency.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.