Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Silver stainless steel cleaning needles in five sizes, copper wire brush, two precision tweezers in plastic case

OXDFK 3D Printer Nozzle Cleaning Kit 50 PCS 0.2/0.25/0.3/0.35/0.4 mm Needles Tweezers Copper Brush

SKU CH-JWRS-YSGJP

A 50-piece kit with stainless-steel needles in 0.2, 0.25, 0.3, 0.35 and 0.4 mm sizes, copper brush and two tweezers clears clogged nozzles when heated to 200 degrees

  • TypeOXDFK
  • Clears blockages precisely with 50 stainless steel needles in .2 .25 .3 .35 .4 mm sizes
  • Heat nozzle to 200 degrees then insert pins for simple unclogging routine
  • Durable stainless steel tips reach tight feed gears and nozzle interiors
  • Includes copper wire brush plus two non-magnetic curved precision tweezers for full maintenance
  • Works with most popular 3D printers across beginner and professional models

Nozzle Cleaning Kit for 3D Printers

The OXDFK kit supplies 50 stainless-steel needles in 0.2, 0.25, 0.3, 0.35 and 0.4 mm diameters, a copper wire brush and two precision tweezers. It targets hobbyists and professionals who need to clear clogged nozzles and maintain consistent extrusion on most common 3D printers.

Installation and Common Issues

Heat the nozzle to 200 degrees or above, then insert and withdraw the chosen needle until filament flows freely. The main risk is burns from the hot nozzle, so handle tools carefully. Using a needle larger than the nozzle bore can damage the orifice, and the sharp points must be kept away from children.

Who This Suits and Who Should Look Elsewhere

Makers who regularly print with different nozzle sizes and want a single maintenance set will find the range of pin diameters convenient. Users who only ever print with a single fixed nozzle size or who prefer automated cleaning filaments may not need the full assortment of manual tools.

Punti di forza

  • Clears blockages precisely with 50 stainless steel needles in .2 .25 .3 .35 .4 mm sizes
  • Heat nozzle to 200 degrees then insert pins for simple unclogging routine
  • Durable stainless steel tips reach tight feed gears and nozzle interiors
  • Includes copper wire brush plus two non-magnetic curved precision tweezers for full maintenance
  • Works with most popular 3D printers across beginner and professional models

Caratteristiche tecniche

BrandOXDFK
ModelOXDFK
Part NumberOXDFK
TypeOXDFK

Domande su questo articolo

How can I confirm the needles are clearing the nozzle properly after I run them through?

Heat the nozzle to 200 °C, then insert and withdraw each needle repeatedly until filament extrudes smoothly without resistance.

Which tools are included in the 50-piece kit and is anything else required to start cleaning?

The box contains 50 stainless-steel needles in 0.2, 0.25, 0.3, 0.35 and 0.4 mm sizes, two precision tweezers and one copper wire brush; no extra items are needed.

How do I decide which needle diameter matches my printer's nozzle?

Choose the needle that corresponds to your nozzle bore — 0.2, 0.25, 0.3, 0.35 or 0.4 mm — so the pin fits through the opening without forcing it.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.