Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

sakose

sakose 12025-LED 120mm 15 LED case fan 2-pack 1100RPM 16dB Green

SKU CH-A592-6KEYN MPN 12025-LED

Two 120mm hydraulic-bearing fans with 15 green LEDs each run at 1100 RPM and 16 dBA for quiet case cooling

  • ColorGreen
  • LEDGreen

Color Green

LED Green

Option 2 Fans, No Controller

  • 120 mm hydraulic-bearing fan runs at 1100 RPM for strong airflow
  • 16 dBA noise level keeps the system whisper-quiet
  • 15 green LEDs per fan create vivid interior lighting
  • Anti-vibration rubber pads cut vibration transfer to the case
  • Two-fan pack covers intake and exhaust in one purchase

120mm LED Case Fan Twin Pack

This twin pack supplies two 120mm case fans with green LED lighting for PC builders who want visible airflow illumination. Each fan uses a hydraulic bearing and runs at 1100RPM to move air through chassis intake or exhaust positions. The 15 LEDs per fan create a consistent green glow suited to themed builds. The 4-pin Molex connector provides direct 12VDC power without motherboard headers.

16dBA Quiet Operation

Rated at 16dBA the fans run quietly during typical desktop workloads while the nine revised-curve blades maintain steady airflow. The hydraulic bearing and sealed structure reduce mechanical noise and limit dust ingress over time. Anti-vibration rubber pads decouple the frame from the case to suppress resonance. Frame cut-backs on both sides enlarge the air path for efficient heat transfer.

Anti-Vibration Pads and Molex Power

Four anti-vibration rubber pads per fan isolate mounting points to lower case-transmitted vibration. The included Molex 4-pin adapters let the fans draw 12VDC directly from a power supply, removing the need for fan headers. No software or controller is bundled so lighting stays at fixed green brightness. The hydraulic bearing and sealed design aim to extend service life without maintenance.

Punti di forza

  • 120 mm hydraulic-bearing fan runs at 1100 RPM for strong airflow
  • 16 dBA noise level keeps the system whisper-quiet
  • 15 green LEDs per fan create vivid interior lighting
  • Anti-vibration rubber pads cut vibration transfer to the case
  • Two-fan pack covers intake and exhaust in one purchase

Caratteristiche tecniche

BrandSakose
ColorGreen
LEDGreen

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

How do I install the 120mm fan with the Molex 4-pin connector and anti-vibration rubber pads?

Mount the fan using the four supplied rubber pads instead of screws to isolate vibration; then plug the Molex 4-pin connector directly into a free 12 V rail from the power supply — no motherboard header is required.

What maintenance will the hydraulic bearing and the 15 green LEDs need over time?

The sealed hydraulic bearing is lubricated for life and requires no oiling; wipe the blades and frame with compressed air every few months to keep dust off the LEDs and maintain airflow.

At 1100 RPM what limit appears first during continuous operation — noise or temperature?

The fan is rated at 16 dBA at 1100 RPM, so audible noise remains the limiting factor long before thermal performance drops; sustained loads will not push it beyond this acoustic ceiling.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.