EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
SAMSUNG
8GB DDR3 1600 ECC Registered server memory module with CL11 latency and 1.50V operation
This 8GB DDR3 module adds registered ECC capacity to compatible server platforms. It operates at 1600MHz with a CAS latency of 11 to deliver 12.8 GB/s bandwidth. The registered design helps reduce electrical load on the memory controller in multi-module configurations.
ECC circuitry detects and corrects single-bit errors during continuous operation without halting the system. Registered buffering stabilises signal integrity across all 240 pins when the memory bus is fully populated. CL11 timing at 1.50V maintains consistent latency under prolonged heavy access patterns.
The dual-rank x4 layout allows higher total capacity per channel compared to single-rank alternatives. Major-brand DRAM components are validated for 24/7 server environments where uptime is critical. Buyers needing non-ECC unbuffered memory for desktop platforms cannot use this module.
| Brand | SAMSUNG |
|---|---|
| Model | M393B1K70DH0-CK0 |
| Capacity | 8GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Peso di spedizione | 0.09 kg |
| Dimensioni del pacco | 305 × 76 × 25 mm |
The module operates at the standard 1.50V DDR3 voltage; actual power draw depends on the server platform and workload, but registered DIMMs typically consume slightly more than unbuffered equivalents due to the register.
The system must support DDR3 registered ECC DIMMs; consumer boards that only accept unbuffered non-ECC memory will not recognise the module.
Mixed ranks and latencies are usually supported; the memory controller will run all channels at the slowest common timing, so the new module will operate at CL11 alongside the existing CL9 sticks.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?