SanDisk
SanDisk SD8SBAT-032G-1122 Z400s 32GB SATA 2.5-Inch internal SSD
A 32 GB 2.5-inch SATA SSD with sequential reads up to 279 MB/s and 20 TBW endurance
- 32GB capacity fits light OS installs and embedded systems
- SATA III interface delivers up to 279 MB/s sequential reads
- 20 TBW endurance rating suits write-light workloads
- 30 mW average power keeps laptop thermals low
- 1,750,000 hour MTBF indicates high reliability
Entry-level SATA SSD for light workloads
The SanDisk Z400s 32GB drive uses a 2.5-inch SATA III interface and fits standard laptop or desktop bays. Its 32GB capacity suits operating-system installs, embedded appliances or thin-client deployments where storage needs are modest. The 7.00mm height matches common caddies without adapters.
SATA III drop-in with minimal power draw
The drive connects to any SATA III, II or I port and needs no extra cables beyond the standard data and power leads. Average consumption sits at 30 mW, rising to 1.6 W active and 1,200 mW or 1,300 mW peak for read and write. Low heat output eases cooling in compact chassis or fanless designs.
Steady-state throughput for sustained writes
Sequential rates reach 279 MB/s read and 48 MB/s write while random performance tops out at 17,300 IOPS read and 10,600 IOPS write. Endurance is rated at 20 TBW, so long-term logging or caching tasks stay within spec. MTBF of 1,750,000 hours reflects consistent reliability under continuous operation.
Punti di forza
- 32GB capacity fits light OS installs and embedded systems
- SATA III interface delivers up to 279 MB/s sequential reads
- 20 TBW endurance rating suits write-light workloads
- 30 mW average power keeps laptop thermals low
- 1,750,000 hour MTBF indicates high reliability
Caratteristiche tecniche
Nessuna caratteristica ancora pubblicata per questo articolo.
Domande su questo articolo
How much data can I write to this Z400s 32GB drive before it reaches its endurance limit?
The drive is rated for 20 TBW total bytes written over its lifetime.
What is the typical power draw when the SSD is active all day?
Average power is 30 mW with active power up to 1.6 W during read and write operations.
Which interface cable and port does this 2.5-inch drive need to work?
It connects via a standard SATA III 6 Gb/s cable and port, also compatible with SATA II and I.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
