Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Seagate BarraCuda 3.5 inch bare internal hard drive with silver aluminium casing and green circuit board visible

Seagate

Seagate BarraCuda ST1500DM003 1.5TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-NCSY-W9F69 MPN ST1500DM003

A 1.5 TB desktop hard drive spinning at 7200 RPM with a 64 MB cache and SATA 6.0 Gb/s interface

  • PackagingBare Drive
  • Capacity1.5TB
  • RPM7200 RPM
  • InterfaceSATA 6.0Gb/s
  • Cache64MB
  • Average Latency4.16ms
  • 5 TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers fast sequential read and write performance
  • 64 MB cache with OptiCache technology boosts responsiveness by up to 45%
  • SATA 6.0 Gb/s interface provides high bandwidth for desktop workloads
  • AcuTrac technology maintains reliable tracking in high vibration environments

BarraCuda 1.5TB Desktop Hard Drive

The Seagate BarraCuda ST1500DM003 is a 1.5TB 3.5-inch internal hard drive spinning at 7200 RPM with a 64MB cache. It connects via a SATA 6.0Gb/s interface and uses Seagate OptiCache technology to improve performance by up to 45 percent. The drive is supplied as a bare unit without cables or mounting brackets.

Suits storage upgrades and secondary data volumes

This drive suits desktop owners adding bulk storage for documents, media or backups where solid-state speed is not required. It is not for buyers who need an operating-system drive with low latency or for systems that only accept 2.5-inch or M.2 form factors. The bare-drive packaging also means it lacks retail accessories.

Standard 3.5-inch SATA installation

Installation follows the usual 3.5-inch SATA procedure: secure the drive in a bay, attach a SATA data cable and a SATA power connector, then initialise it in the operating system. The drive was erased to DoD 5220.22 M standard and tested good, though up to 25 bad sectors may be present. SmartAlign technology handles alignment without jumper changes.

Punti di forza

  • 5 TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers fast sequential read and write performance
  • 64 MB cache with OptiCache technology boosts responsiveness by up to 45%
  • SATA 6.0 Gb/s interface provides high bandwidth for desktop workloads
  • AcuTrac technology maintains reliable tracking in high vibration environments

Caratteristiche tecniche

BrandSeagate
SeriesBarraCuda
ModelST1500DM003
PackagingBare Drive
Capacity1.5TB
RPM7200 RPM
InterfaceSATA 6.0Gb/s
Cache64MB
Average Latency4.16ms
Form Factor3.5"
FeaturesSeagate OptiCache technology improves performance by up to 45%
Seagate AcuTrac technology enables reliable read/write performance even in high touch operating environments
Seagate SmartAlign technology for no-hassle transition to Advanced Format 4K sector technology
Free DiscWizard software enables 3TB drive use on legacy PC BIOS as well as Windows XP-based systems
SATA 6Gb/s maximizes data transfer rates
Peso di spedizione1.50 kg
Dimensioni del pacco146 × 102 × 25 mm

Domande su questo articolo

Will the 3.5-inch 1.5TB SATA 6.0Gb/s drive fit and power on in my desktop case?

The 3.5-inch form factor mounts in standard desktop bays and the SATA 6.0Gb/s interface connects to any SATA data and power cable already present in a typical PC.

Can the 7200 RPM 64MB cache drive serve as a secondary store alongside an older SATA 3.0Gb/s mechanical disk?

Yes, the SATA 6.0Gb/s interface is backward compatible so the drive will operate at the slower link speed when paired with an older controller.

How do I verify the 1.5TB capacity and 4.16ms latency are healthy after installation?

Initialise the drive in Disk Management, confirm the full 1.5TB appears, then run a SMART self-test to check for reallocated sectors and latency performance.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.