NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Simmtec, Inc
16 GB desktop memory kit with four 4 GB DDR3-1600 modules, dual-voltage 1.35 V or 1.5 V operation and 240-pin unbuffered non-ECC design
This kit supplies 16GB of DDR3 memory across four 4GB modules. It targets owners of older desktop platforms that still use 240-pin DDR3 slots. The non-ECC unbuffered design suits standard consumer motherboards. Builders restoring or expanding legacy systems will find the capacity useful for multitasking.
Each stick operates at either 1.35V or 1.5V, so the kit works in boards that require low-voltage DDR3 as well as those that only support the standard voltage. The 240-pin UDIMM form factor matches the desktop DIMM slots on compatible motherboards. No extra cooling or power connections are needed beyond the slot itself. Populating all four slots leaves no free DIMM sockets for further expansion.
The supplier backs the modules with a lifetime replacement warranty and free technical support. This means a failed stick can be exchanged without additional cost. The memory uses chips from major manufacturers such as Micron, Samsung, Hynix or Elpida and meets JEDEC standards. No software utilities or RGB control applications are included with the hardware.
| Capacity | 16GB (4 x 4GB) |
|---|---|
| Speed | DDR3 1600 (PC3 12800) |
The PC3-12800 rating corresponds to a peak bandwidth of 12,800 MB/s at 1600 MT/s, which is the sustained throughput limit for this DDR3 kit.
The modules operate at either 1.35 V or 1.5 V, drawing less power and generating less heat than standard 1.5 V-only DDR3, so thermal load stays low during continuous use.
Yes, this kit uses 240-pin UDIMM DDR3 modules that are non-ECC and unbuffered, so the board must provide DDR3 slots and accept that configuration.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?