Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Square black 150mm case fan with dual ball bearings and 4-pin PWM connector

SXDOOL

SXDOOL 9GV1512P5M031Size 150x150x50mm 12V 1.2A case fan

SKU CH-QK6Y-Y16VH MPN 9GV1512P5M031Size

A 150 mm square case fan with dual ball bearings, 12 V operation, 1.2 A draw and PWM speed control

  • Dual ball bearings extend service life
  • 12 V 1.2 A delivers strong airflow
  • PWM speed control adjusts cooling to demand
  • 150 mm frame fits large-case mounting points
  • 50 mm thickness provides high static pressure

SXDOOL 150mm DC case fan

The SXDOOL 9GV1512P5M031Size is a 150mm square frame case fan designed for 12V DC operation. It draws 1.2A and uses a dedicated 5-pin connector that supports PWM speed control. The unit suits builders adding high-volume airflow to larger chassis or server enclosures.

15050 frame with dual ball bearings

At 150x150x50mm the fan delivers substantial air volume and static pressure for dense component stacks or radiator mounts. Dual ball bearings extend service life under continuous high-speed running. The 12V 1.2A rating sets a firm power ceiling; systems limited to lower-current headers will not reach full RPM.

5-pin PWM connector and mounting implications

The dedicated 5-pin line shown in the supplier diagram carries power, ground, tachometer and PWM signals in one housing. Builders must verify their motherboard or fan controller provides a matching header; older 3-pin or 4-pin sockets will not supply the control signal. Four corner mounting holes accept standard 150mm screw patterns for straightforward installation.

Punti di forza

  • Dual ball bearings extend service life
  • 12 V 1.2 A delivers strong airflow
  • PWM speed control adjusts cooling to demand
  • 150 mm frame fits large-case mounting points
  • 50 mm thickness provides high static pressure

Caratteristiche tecniche

BrandXCLIO

Domande su questo articolo

Will the 150x150x50mm frame and 12V 1.2A draw fit my older case fan mounts and power headers?

The fan measures 150 by 150 by 50 millimetres and draws 1.2 amps at 12 volts, so it fits standard 150 mm mounting holes and typical 12 volt fan headers.

How can I verify the dual ball bearing and PWM speed control are functioning after installation?

Listen for smooth, quiet rotation from the dual ball bearing and use BIOS or software to confirm the 4-pin PWM line adjusts speed smoothly across the range.

Does the box include mounting screws or a Molex adapter, or must I buy them separately?

The package contains the 150 mm fan with its dedicated 4-pin PWM cable; mounting screws and any Molex adapter are not included and must be sourced separately.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.