Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 40mm square case fan with four-pin connector

SXDOOL

SXDOOL DBTA0420B2U 40mm 4-Pin PWM Case Fan 12000 RPM

SKU CH-K20H-JD9QB

40 mm dual-ball-bearing PWM fan spinning up to 12 000 RPM with 4-pin speed control

  • TypeCase Fan
  • Fan Size40mm
  • Bearing Type2 Ball
  • RPM>7000 RPM
  • Power Connector4 Pin
  • ColorBlack
  • High airflow in a 40 × 40 × 20 mm frame
  • Double ball bearing rated for 10.0000 hours at 25 °C
  • 4-pin PWM lets the motherboard control speed up to 12000 RPM
  • 12 V, 0.50 A draw keeps power demand low
  • Non-LED black design suits any build aesthetic

Targeted Cooling for Tight Spaces

This 40 mm case fan fits compact chassis and specialized heatsinks where larger units cannot mount. The 4-pin PWM connector allows the motherboard to regulate speed automatically based on temperature. It is not suited for builds that rely on a single large fan for silent whole-case airflow.

Thermal and Acoustic Profile

Double ball bearings support sustained operation at speeds above 7000 RPM while drawing 0.50 A at 12 V. The supplier rates the service life at 10.0000 hours at 25 °C and 45-85 % relative humidity. Expect noticeable airflow noise when the fan runs near its 12000 RPM ceiling.

PWM Control and Physical Fit

The 4-wire interface enables precise speed curves without additional software or controllers. Physical dimensions are 40 × 40 × 20 mm, matching the AVC 4020 form factor. No LEDs, mounting screws or adapters are included in the package.

Punti di forza

  • High airflow in a 40 × 40 × 20 mm frame
  • Double ball bearing rated for 10.0000 hours at 25 °C
  • 4-pin PWM lets the motherboard control speed up to 12000 RPM
  • 12 V, 0.50 A draw keeps power demand low
  • Non-LED black design suits any build aesthetic

Caratteristiche tecniche

TypeCase Fan
Fan Size40mm
Bearing Type2 Ball
RPM>7000 RPM
Power Connector4 Pin
ColorBlack
LEDNon-LED

Domande su questo articolo

How do I install the 40 mm 4-pin PWM fan and which step do people get wrong?

Mount the 40 × 40 × 20 mm frame with four screws, connect the 4-pin PWM header to the motherboard, and enable PWM control in BIOS so the fan runs above 7000 RPM instead of staying at minimum speed.

What maintenance or replacement will the double ball bearing fan need later?

The double ball bearing is rated for 10.0000 hours at 25 °C and 45-85% RH; after that period the bearing may develop noise or vibration and the fan should be replaced.

What limit appears first during sustained 12000 RPM operation?

Continuous 12 V 0.50 A draw at 12000 RPM generates heat that can push internal temperatures beyond the 25 °C design point, causing the PWM controller to throttle speed to protect the motor.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.