Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Small green circuit board with M.2 edge connector and two SATA ports

Syba

Syba SI-ADA40149 M.2 B+M Key 22x42 to SATA III 2-Port Expansion Card

SKU CH-B7EW-T46SC MPN SI-ADA40149

Adds two SATA III ports through an M.2 22x42 slot using a JMB582 controller

  • TypeController Card
  • External Ports2 x SATA III
  • Internal PortsM.2 B+M Key interface
  • Data Transfer RateSATA III 6Gb/s
  • Operating Systems SupportedAll Windows OS
  • CompatibilityCompatible with Windows XP/7/8/10/MAC/NAS/Linux OS. No drive
  • Add two SATA III ports through a single M.2 22x42 slot
  • Jmicron JMB582 chipset enables 6 Gbps SATA 3.0 speeds
  • AHCI 1.0 compliance ensures broad OS support without drivers
  • Hot-plug and hot-swap capability on both SATA ports
  • PCIe 3.1a base specification compliance for modern motherboards

M.2 B+M Key 22x42 to SATA III adapter

This Syba SI-ADA40149 controller card adds two SATA III ports through a single M.2 B+M Key 22x42 slot. It uses the Jmicron JMB582 chipset and complies with PCI Express base specification revision 3.1a. The card supports SATA 3.0 transfer rates up to 6Gbps with maximum sequential read and write speeds of 850 MB/s. No driver installation is required for supported operating systems.

Builders adding SATA storage via M.2

This card suits builders who have a free M.2 B+M Key 22x42 slot and need to connect up to two SATA drives. It supports hot-plug and hot-swap functionality on both ports. The adapter works with Windows XP through 10, macOS, Linux and NAS platforms. It is not for systems that lack an M.2 B+M Key 22x42 interface or for users who need more than two additional SATA connections.

M.2 22x42 form factor decides fit

The single specification that decides compatibility is the M.2 22x42 B+M Key physical interface. Your motherboard or chassis must provide an M.2 slot wired for B+M Key at the 22x42 dimension. If the available slot is a different keying or length, this card will not install. The package includes the card, a SATA cable, a manual and a driver CD.

Punti di forza

  • Add two SATA III ports through a single M.2 22x42 slot
  • Jmicron JMB582 chipset enables 6 Gbps SATA 3.0 speeds
  • AHCI 1.0 compliance ensures broad OS support without drivers
  • Hot-plug and hot-swap capability on both SATA ports
  • PCIe 3.1a base specification compliance for modern motherboards

Caratteristiche tecniche

BrandSYBA
ModelSI-ADA40149
TypeController Card
External Ports2 x SATA III
Internal PortsM.2 B+M Key interface
Data Transfer RateSATA III 6Gb/s
Operating Systems SupportedAll Windows OS
CompatibilityCompatible with Windows XP/7/8/10/MAC/NAS/Linux OS. No driver installation is required. Support install Windows OS from Win10 PE.
SpecificationsThe IO Crest 2 Port SATA III 6Gb/s M.2 22x42 Controller Card ( SI-ADA40149 ) is the easiest way to update any computer with SATA ports with a free M.2 slot. Once installed¸ this host card will add SATA ports with two independent channels. This allows support of two SATA devices at speeds of up to 6Gb/s whether it is a SATA hard drive or SATA device.
Using the JMB582 chipset, the SI-ADA40149 can provide a maximum sequential Read / Write Speed of 850 MB/s to 2 SATA 6Gb/s ports. For the storage solution based on data transfer of multiple hard drives, the newly added FIS-based switching
FeaturesComplies with PCI Express base specification revisiion 3.1a. M.2 B+M Key interface
Compliant with Serial ATA AHCI (advanced host controller interface) Specification Rev 1.0, Supports SATA 3.0 transfer rate up to 6Gbps. Maxium Sequencial Read / Write Speed 850 MB/s.
Jmicron JMB582 Chipset, Port Multiplier FIS-based and Command-based switching supported.Hot plug and Hot swap SATA ports. Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
Compatible with Windows XP/7/8/10/MAC/NAS/Linux OS. No driver installation is required. Support install Windows OS from Win10 PE.
Package ContentsM.2 SATA Card
SATA Cable
Manual
Driver CD
Peso di spedizione0.07 kg
Dimensioni del pacco150 × 99 × 43 mm

Domande su questo articolo

What size M.2 slot does the SI-ADA40149 need?

The card fits a 22 x 42 mm M.2 B+M key slot compliant with PCI Express base specification revision 3.1a.

How is the card installed and what step is often missed?

Insert the card into the M.2 slot, secure it with the retention screw, then connect the included SATA cables to the two SATA III ports; no driver installation is required for Windows XP/7/8/10, MAC, NAS or Linux.

What upkeep will the adapter need later?

The Jmicron JMB582 controller supports hot-plug and hot-swap, so SATA drives can be added or removed without powering down; the card itself has no moving parts or firmware updates to maintain.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.