Western Digital
Western Digital WD10EADS 1000GB 5400RPM 32MB 3.5" SATA internal hard drive
1 TB desktop drive with 5400 RPM, 32 MB cache and SATA 3Gb/s interface
- 1 TB capacity for large media libraries
- 5400 RPM rotation keeps noise and heat low
- 32 MB cache buffers frequent read requests
- StableTrac and IntelliSeek improve tracking accuracy
- 5 inch SATA form factor fits standard desktop bays
WD Caviar Green 1 TB desktop drive
The WD10EADS is a 3.5-inch internal hard drive with a 1000 GB capacity, a 5400 RPM spindle speed and a 32 MB cache. It connects through a SATA 3 Gb/s interface and includes Western Digital's StableTrac, IntelliSeek, IntelliPark and IntelliPower technologies along with perpendicular magnetic recording.
Suited to bulk storage and quiet builds
This drive suits users who need large, affordable capacity for media libraries, backups or secondary data volumes where low noise and reduced power draw matter more than peak throughput. It is not for buyers who want the fastest possible boot or application load times, nor for workloads that demand sustained high random I/O performance.
Check SATA power and data connections
Before ordering, verify that your motherboard or controller provides a free SATA 3 Gb/s port and that your power supply has an available SATA power connector. Confirm the chassis has a 3.5-inch drive bay or a compatible mounting bracket, and ensure your operating system can recognise a 1000 GB volume without additional drivers.
Punti di forza
- 1 TB capacity for large media libraries
- 5400 RPM rotation keeps noise and heat low
- 32 MB cache buffers frequent read requests
- StableTrac and IntelliSeek improve tracking accuracy
- 5 inch SATA form factor fits standard desktop bays
Caratteristiche tecniche
Nessuna caratteristica ancora pubblicata per questo articolo.
Domande su questo articolo
Does my motherboard need a SATA 3Gb/s port and a 3.5-inch drive bay for the WD10EADS?
Yes, the drive uses a standard SATA 3Gb/s interface and the 3.5-inch form factor, so a compatible SATA port and a 3.5-inch bay are required.
Will the WD10EADS work on a motherboard that only supports SATA 1.5Gb/s?
The drive is backward compatible with SATA 1.5Gb/s controllers, though it will operate at the slower 1.5Gb/s transfer rate instead of its native 3Gb/s speed.
How can I confirm the WD10EADS is running at 5400 RPM after installation?
Check the reported rotational speed in your BIOS or a system information tool such as CrystalDiskInfo; it should show 5400 RPM for this model.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.



