Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black adapter board with M.2 slot and 2.5 inch SATA connector inside matching black case

WRIARICH

WRIARICH B+M Key M.2 SATA SSD to 2.5" SATA Adapter with Case Black

SKU CH-B2RZ-VM7Y4

Adapts B+M key M.2 SATA SSDs to a 2.5" SATA form factor with an included case

  • ColorBlack
  • Changer TypeSATA
  • SpecificationsNA, Optimal Shop, SATA, 1, 5.98 L x 3.31 W x 0.31 H inches,
  • Connector ASATA
  • Connector BSATA
  • Connector PlatingBlack
  • Converts M.2 SATA SSD to 2.5" SATA for desktop or laptop use
  • Supports 22 x 30 mm, 22 x 42 mm, 22 x 60 mm and 22 x 80 mm B+M key SATA SSDs
  • Driver-free operation keeps original speed and properties unchanged
  • Compact 10 cm x 7 cm x 0.8 cm adapter fits standard 2.5" drive bays
  • Includes mounting hardware for secure installation of different SSD lengths

M.2 SATA to 2.5" Adapter

The WRIARICH adapter converts a B+M key M.2 NGFF SATA solid-state drive into a standard 2.5-inch SATA form factor. It accepts drive lengths of 22 by 30 millimetres, 22 by 42 millimetres, 22 by 60 millimetres and 22 by 80 millimetres. The black enclosure measures 10 by 7 by 0.8 centimetres and weighs 0.05 pounds. No drivers are required for operation.

Builders repurposing SATA M.2 drives

This adapter suits users moving a SATA-based M.2 module into a 2.5-inch bay on a desktop or laptop. It does not support PCIe or NVMe M.2 drives, so buyers with those modules must look elsewhere. The package includes a copper standoff for securing shorter drives at the correct mounting point.

B+M key SATA-only compatibility

The single specification that decides fit is the M.2 keying and protocol: only B+M key drives using the SATA transfer mode work with this adapter. PCIe-based B-key and any M-key NVMe drives are explicitly excluded. Verify your drive uses SATA signalling before purchasing.

Punti di forza

  • Converts M.2 SATA SSD to 2.5" SATA for desktop or laptop use
  • Supports 22 x 30 mm, 22 x 42 mm, 22 x 60 mm and 22 x 80 mm B+M key SATA SSDs
  • Driver-free operation keeps original speed and properties unchanged
  • Compact 10 cm x 7 cm x 0.8 cm adapter fits standard 2.5" drive bays
  • Includes mounting hardware for secure installation of different SSD lengths

Caratteristiche tecniche

BrandSoNNeT
SeriesNA
ModelNA
Part NumberOptimal Shop
ColorBlack
Changer TypeSATA
SpecificationsNA, Optimal Shop, SATA, 1, 5.98 L x 3.31 W x 0.31 H inches, 0.05 pounds, Black
Connector ASATA
Connector BSATA
Connector PlatingBlack
Connector StyleStandard
FeaturesSATA, Black, 1, Optimal Shop, NA
Dimensions20'
Weight0.05 pounds
Package Quantity1

Domande su questo articolo

Does the adapter throttle the SATA SSD under sustained workloads?

The adapter only converts the physical interface; the speed and other properties are not changed, so the SSD runs at its native SATA rate.

Does the adapter or case add noticeable heat or noise during all-day operation?

The passive circuit board and plastic case have no active cooling, so they add no fan noise and negligible heat beyond the SSD itself.

What existing hardware is required to use this adapter with a 2.5" SATA bay?

You need a standard 2.5" SATA drive bay and a SATA data plus power cable from the host system.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.