Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Three gray syringes of thermal paste with measurement markings and rubber caps

Zalman

Zalman ZM-STC7 3-Pack thermal paste 4 g 7.2 W/m·K 220 Pa.s

SKU CH-P10B-GDXDY MPN ZM-STC7

Three 4 g syringes of 7.2 W/m·K thermal compound with measuring graduations and rubber caps for CPU and GPU use

Quantity 3-Pack

  • 1-Pack
  • 2-Pack
  • 3-Pack
  • 5-Pack
  • 10-Pack

Le versioni barrate esistono, ma non sono disponibili qui.

  • 3-pack provides 12 g total for multiple builds
  • 2 W/m·K conductivity moves heat efficiently from CPU or GPU
  • 220 Pa.s viscosity spreads evenly without running
  • Syringe graduations show exact amount used each time
  • Rubber cap keeps compound fresh between applications

Zalman STC7 3-Pack Thermal Compound

This three-pack supplies three 4 g syringes of Zalman STC7 thermal paste for CPU and GPU applications. Each syringe delivers 7.2 W/m·K thermal conductivity and 220 Pa·s viscosity. The gray compound uses silicone oil, alumina, aluminum and zinc oxide. It is electrically non-conductive and RoHS compliant.

Best for Standard Coolers and Reuse

The paste suits builders who want a measurable, reusable syringe for typical air or liquid coolers. The graduated barrel lets you see remaining volume. Buyers who need higher conductivity than 7.2 W/m·K or a lower viscosity for ultra-thin bond lines should look at something else.

Simple Syringe Application

The 117.4 x 21.2 x 15 mm syringe fits a rubber cap that prevents drying between uses. Depress the plunger to dispense a controlled amount onto the chip. Common issues are applying too much paste or trapping air bubbles if the surfaces are not clean.

Punti di forza

  • 3-pack provides 12 g total for multiple builds
  • 2 W/m·K conductivity moves heat efficiently from CPU or GPU
  • 220 Pa.s viscosity spreads evenly without running
  • Syringe graduations show exact amount used each time
  • Rubber cap keeps compound fresh between applications

Caratteristiche tecniche

BrandZALMAN
SeriesSTC
ModelSTC 7

Altre versioni di questo modello

altri 1 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

What cooler or component do I need before applying this 7.2 W/m·K paste?

You need a CPU or GPU with a heatsink or water block ready; the paste fills the microscopic gap between the die and the cooler base.

Can I use this 220 Pa.s compound on an older processor that previously had thicker grease?

Yes, the moderate viscosity spreads easily under mounting pressure and replaces older paste without needing special tools.

How can I confirm the 4 g syringe is dispensing correctly after opening?

The barrel has printed graduations so you can see the grey compound advance and verify the rubber cap keeps it from hardening between uses.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.