Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 80mm square case fan with 32mm depth and three-wire connector

Zyvpee

Zyvpee DASA0832B2M 80mm 12V 0.7A 3-wire case fan

SKU CH-6EJK-T5RN4

An 80 mm ball-bearing case fan drawing .7 A at 12 V with a 3-wire connector for server or chassis cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 wires
  • ColorBlack
  • LEDNon-LED
  • 80 mm frame fits tight chassis spaces
  • 12 V 0.7 A draw keeps power load low
  • ball bearing design extends operational lifespan
  • 3-wire connector enables speed monitoring
  • 32 mm depth suits slim server enclosures

Zyvpee DASA0832B2M 80mm Case Fan

The Zyvpee DASA0832B2M is an 80mm DC axial fan built for case and server cooling. It runs on 12V power and draws .7A through a standard 3-wire connector. The black frame measures 80 by 32mm and uses a ball bearing for rotation. No LED lighting is included.

Ball Bearing Thermals and Power

Ball bearing operation provides consistent airflow for general chassis ventilation. The 12V .7A rating keeps power draw modest in normal use. Acoustic output will reflect the bearing type and rotational speed under load. The 3-wire connection supplies power and tachometer feedback without PWM control.

Upgrade From Sleeve Bearing or Smaller Fans

This unit replaces worn sleeve bearing fans that have developed rattle or reduced flow. It also serves as a direct swap for 80mm fans with failed motors. The jump is worth it when a server or workstation needs reliable long-term cooling at this form factor. Builders needing PWM speed control or larger diameter airflow should look elsewhere.

Punti di forza

  • 80 mm frame fits tight chassis spaces
  • 12 V 0.7 A draw keeps power load low
  • ball bearing design extends operational lifespan
  • 3-wire connector enables speed monitoring
  • 32 mm depth suits slim server enclosures

Caratteristiche tecniche

BrandZyvpee
SeriesDASA0832
ModelDASA0832B2M
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 wires
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions80*32mm
Package Contentsrefer to title

Domande su questo articolo

How do I install the 80mm DASA0832B2M fan and which way should the airflow arrow point?

Mount the fan using four screws through the 80mm frame holes, then plug the 3-wire connector into a 12V fan header; the arrow on the frame must point toward the interior for intake or toward the vent for exhaust.

What maintenance will the ball-bearing DASA0832B2M need over time?

The ball bearing is sealed and requires no lubrication; if noise or vibration appears after extended use, replace the entire 80mm unit.

At what point does the 0.7A current draw become the limiting factor during continuous operation?

The 12V 0.7A rating is the steady-state limit; sustained loads that push the motor beyond this draw will trigger the supply's over-current protection first.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.