Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 60 by 25 mm sleeve bearing case fan with two pin connector

Zyvpee

Zyvpee KD1206PTS1 6025 12V 1.8W 2-Pin Sleeve Bearing Case Fan

SKU CH-S02W-VPDW8

60 mm sleeve-bearing case fan runs at up to 1600 RPM with a 2-pin 12 V connector

  • TypeCPU Cooler Fan
  • Bearing TypeSleeve Bearing
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 60 mm frame fits tight builds
  • 12 V 1.8 W draw keeps power use low
  • Sub-1600 RPM sleeve bearing runs quietly
  • Two-pin connector plugs straight into legacy headers
  • Non-LED black design stays invisible in dark cases

Compact 60 mm case fan

The Zyvpee KD1206PTS1 is a 60 mm by 25 mm case fan built for tight chassis spaces and targeted CPU cooling. It runs on a 12 V supply and draws 1.8 W through a simple two‑pin connector. The black, non‑LED frame keeps the look understated for office or home builds.

1600 RPM ceiling and sleeve bearing

At under 1600 RPM the fan moves enough air for low‑power processors and auxiliary airflow duties. The sleeve bearing keeps acoustic output low at idle but will show wear sooner than ball‑bearing alternatives under continuous high‑speed operation. Headroom disappears quickly when cooling loads exceed modest thermal envelopes.

Two‑pin power and fixed speed

The two‑pin header delivers constant voltage, so speed cannot be modulated by PWM or voltage curves. Builders must ensure the motherboard or fan controller supplies a steady 12 V line and accept that the fan runs at its single rated speed. This simplicity frees a four‑pin header for a PWM‑controlled component elsewhere in the loop.

Punti di forza

  • Compact 60 mm frame fits tight builds
  • 12 V 1.8 W draw keeps power use low
  • Sub-1600 RPM sleeve bearing runs quietly
  • Two-pin connector plugs straight into legacy headers
  • Non-LED black design stays invisible in dark cases

Caratteristiche tecniche

BrandZyvpee
SeriesKD1206PTS1
ModelKD1206PTS1
TypeCPU Cooler Fan
Bearing TypeSleeve Bearing
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions60*25MM

Domande su questo articolo

Will the 60 mm frame and 2-pin connector fit the same mounting holes and header as my current 6025 sleeve-bearing fan?

Yes, the 60*25 mm dimensions and 2-pin power connector match the standard 6025 form factor, so it drops into existing screw holes and plugs straight into the same motherboard or controller header.

How can I confirm the KD1206PTS1 is spinning at the rated speed once installed?

The fan is specified at under 1600 RPM; after power-up, check the RPM reading in BIOS or a hardware-monitoring utility — it should report a value below that figure.

Does the box include mounting screws or a 2-pin to 3-pin adapter, or must I buy them separately?

The supplied unit is the fan only; mounting screws and any pin-count adapters are not included and need to be sourced separately.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.