Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Translucent 2.85 mm filament on a small spool

Lay Filaments

Lay Filaments BENDLAY tough 3D printing filament 2.85 mm 0.25 kg

SKU CH-4G5K-YKEN1

Tough, translucent 2.85 mm filament prints clear, bendable parts at 230–240 °C with no stress whitening

  • Nearly clear prints thanks to extreme translucency
  • No stress whitening when parts are bent
  • Safe for household, food and medical use
  • Great alternative to ABS and soft PLA
  • Prints at 230 - 240 degC with ± .1 mm tolerance

Lay Filaments BENDLAY tough filament 2.85 mm

This 2.85 mm diameter BENDLAY filament from Lay Filaments comes in a 0.25 kg spool and prints at 230 to 240 °C. It is a modified butadiene material that is safe for household, food-contact and medical-device applications. The formulation eliminates stress whitening when bent and serves as a tough, extremely translucent alternative to ABS and soft PLA.

Sustained printing behaviour

High interlayer adhesion keeps layers bonded during long prints and the material absorbs far less moisture than ABS, reducing warping over extended sessions. It remains bendable after printing so finished parts retain flexibility without becoming brittle. Diameter tolerance of ± 0.1 mm supports consistent extrusion throughout a full spool.

Thermal and handling characteristics

The recommended nozzle range of 230 to 240 °C works with most standard hot-ends and the low moisture uptake means less drying time between prints. Post-processing uses brake cleaner as a solvent while acetone makes the material crumble, giving a clear chemical distinction for smoothing or removal. No heated-chamber requirement is specified.

Privalumai

  • Nearly clear prints thanks to extreme translucency
  • No stress whitening when parts are bent
  • Safe for household, food and medical use
  • Great alternative to ABS and soft PLA
  • Prints at 230 - 240 degC with ± .1 mm tolerance

Specifikacijos

BrandLay Filaments

Klausimai apie šią prekę

How much heat does the 2.85 mm BendLay filament need during long prints?

The recommended printing temperature is 230 to 240 °C, which keeps the filament flowing steadily during extended runs.

What printer hardware is required to use this 2.85 mm spool?

A 3D printer that accepts 2.85 mm filament and can reach 230 to 240 °C at the hot end.

Will the 0.25 kg BendLay spool work on a machine that currently prints ABS?

Yes, it prints at a similar 230 to 240 °C range, absorbs less moisture and warps less than ABS on the same hardware.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.