Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Translucent 2.85 mm filament on a small spool

Lay Filaments

Lay Filaments BENDLAY tough 3D printing filament 2.85 mm 0.25 kg

SKU CH-4G5K-YKEN1

Tough, translucent 2.85 mm filament prints clear, bendable parts at 230–240 °C with no stress whitening

  • Nearly clear prints thanks to extreme translucency
  • No stress whitening when parts are bent
  • Safe for household, food and medical use
  • Great alternative to ABS and soft PLA
  • Prints at 230 - 240 degC with ± .1 mm tolerance

Lay Filaments BENDLAY tough filament 2.85 mm

This 2.85 mm diameter BENDLAY filament from Lay Filaments comes in a 0.25 kg spool and prints at 230 to 240 °C. It is a modified butadiene material that is safe for household, food-contact and medical-device applications. The formulation eliminates stress whitening when bent and serves as a tough, extremely translucent alternative to ABS and soft PLA.

Sustained printing behaviour

High interlayer adhesion keeps layers bonded during long prints and the material absorbs far less moisture than ABS, reducing warping over extended sessions. It remains bendable after printing so finished parts retain flexibility without becoming brittle. Diameter tolerance of ± 0.1 mm supports consistent extrusion throughout a full spool.

Thermal and handling characteristics

The recommended nozzle range of 230 to 240 °C works with most standard hot-ends and the low moisture uptake means less drying time between prints. Post-processing uses brake cleaner as a solvent while acetone makes the material crumble, giving a clear chemical distinction for smoothing or removal. No heated-chamber requirement is specified.

Poudarki

  • Nearly clear prints thanks to extreme translucency
  • No stress whitening when parts are bent
  • Safe for household, food and medical use
  • Great alternative to ABS and soft PLA
  • Prints at 230 - 240 degC with ± .1 mm tolerance

Specifikacije

BrandLay Filaments

Vprašanja o tem izdelku

How much heat does the 2.85 mm BendLay filament need during long prints?

The recommended printing temperature is 230 to 240 °C, which keeps the filament flowing steadily during extended runs.

What printer hardware is required to use this 2.85 mm spool?

A 3D printer that accepts 2.85 mm filament and can reach 230 to 240 °C at the hot end.

Will the 0.25 kg BendLay spool work on a machine that currently prints ABS?

Yes, it prints at a similar 230 to 240 °C range, absorbs less moisture and warps less than ABS on the same hardware.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.