Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Translucent 2.85 mm filament on a small spool

Lay Filaments

Lay Filaments BENDLAY tough 3D printing filament 2.85 mm 0.25 kg

SKU CH-4G5K-YKEN1

Tough, translucent 2.85 mm filament prints clear, bendable parts at 230–240 °C with no stress whitening

  • Nearly clear prints thanks to extreme translucency
  • No stress whitening when parts are bent
  • Safe for household, food and medical use
  • Great alternative to ABS and soft PLA
  • Prints at 230 - 240 degC with ± .1 mm tolerance

Lay Filaments BENDLAY tough filament 2.85 mm

This 2.85 mm diameter BENDLAY filament from Lay Filaments comes in a 0.25 kg spool and prints at 230 to 240 °C. It is a modified butadiene material that is safe for household, food-contact and medical-device applications. The formulation eliminates stress whitening when bent and serves as a tough, extremely translucent alternative to ABS and soft PLA.

Sustained printing behaviour

High interlayer adhesion keeps layers bonded during long prints and the material absorbs far less moisture than ABS, reducing warping over extended sessions. It remains bendable after printing so finished parts retain flexibility without becoming brittle. Diameter tolerance of ± 0.1 mm supports consistent extrusion throughout a full spool.

Thermal and handling characteristics

The recommended nozzle range of 230 to 240 °C works with most standard hot-ends and the low moisture uptake means less drying time between prints. Post-processing uses brake cleaner as a solvent while acetone makes the material crumble, giving a clear chemical distinction for smoothing or removal. No heated-chamber requirement is specified.

Pluspunten

  • Nearly clear prints thanks to extreme translucency
  • No stress whitening when parts are bent
  • Safe for household, food and medical use
  • Great alternative to ABS and soft PLA
  • Prints at 230 - 240 degC with ± .1 mm tolerance

Specificaties

BrandLay Filaments

Vragen over dit artikel

How much heat does the 2.85 mm BendLay filament need during long prints?

The recommended printing temperature is 230 to 240 °C, which keeps the filament flowing steadily during extended runs.

What printer hardware is required to use this 2.85 mm spool?

A 3D printer that accepts 2.85 mm filament and can reach 230 to 240 °C at the hot end.

Will the 0.25 kg BendLay spool work on a machine that currently prints ABS?

Yes, it prints at a similar 230 to 240 °C range, absorbs less moisture and warps less than ABS on the same hardware.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.