Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Translucent 2.85 mm filament on a small spool

Lay Filaments

Lay Filaments BENDLAY tough 3D printing filament 2.85 mm 0.25 kg

SKU CH-4G5K-YKEN1

Tough, translucent 2.85 mm filament prints clear, bendable parts at 230–240 °C with no stress whitening

  • Nearly clear prints thanks to extreme translucency
  • No stress whitening when parts are bent
  • Safe for household, food and medical use
  • Great alternative to ABS and soft PLA
  • Prints at 230 - 240 degC with ± .1 mm tolerance

Lay Filaments BENDLAY tough filament 2.85 mm

This 2.85 mm diameter BENDLAY filament from Lay Filaments comes in a 0.25 kg spool and prints at 230 to 240 °C. It is a modified butadiene material that is safe for household, food-contact and medical-device applications. The formulation eliminates stress whitening when bent and serves as a tough, extremely translucent alternative to ABS and soft PLA.

Sustained printing behaviour

High interlayer adhesion keeps layers bonded during long prints and the material absorbs far less moisture than ABS, reducing warping over extended sessions. It remains bendable after printing so finished parts retain flexibility without becoming brittle. Diameter tolerance of ± 0.1 mm supports consistent extrusion throughout a full spool.

Thermal and handling characteristics

The recommended nozzle range of 230 to 240 °C works with most standard hot-ends and the low moisture uptake means less drying time between prints. Post-processing uses brake cleaner as a solvent while acetone makes the material crumble, giving a clear chemical distinction for smoothing or removal. No heated-chamber requirement is specified.

Najważniejsze cechy

  • Nearly clear prints thanks to extreme translucency
  • No stress whitening when parts are bent
  • Safe for household, food and medical use
  • Great alternative to ABS and soft PLA
  • Prints at 230 - 240 degC with ± .1 mm tolerance

Specyfikacja

BrandLay Filaments

Pytania dotyczące tego produktu

How much heat does the 2.85 mm BendLay filament need during long prints?

The recommended printing temperature is 230 to 240 °C, which keeps the filament flowing steadily during extended runs.

What printer hardware is required to use this 2.85 mm spool?

A 3D printer that accepts 2.85 mm filament and can reach 230 to 240 °C at the hot end.

Will the 0.25 kg BendLay spool work on a machine that currently prints ABS?

Yes, it prints at a similar 230 to 240 °C range, absorbs less moisture and warps less than ABS on the same hardware.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.