Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Five spools of silk PLA filament in blue orange white red green

PrintOxe

PrintOxe PLA like SILK Filament 5 Pack 1.75mm 1Kg each +/- .03 mm 3D printers accessory

SKU CH-TC03-N19AA

Five-colour silk PLA filament pack totalling 5 kg with ± .03 mm accuracy for a glossy finish on most 1.75 mm printers

  • TypeFilament
  • Five-colour silk PLA pack for vibrant prints
  • High-gloss formula gives outstanding shiny surface finish
  • Dimensional accuracy ± .03 mm for precise extrusion
  • Vacuum-sealed spools with desiccant protect against moisture
  • 75 mm diameter works with popular 3D printers

Five-colour silk PLA bundle

This set supplies five 1 kilogram spools of 1.75 millimetre PLA filament in blue, orange, white, red and green. The silk formulation produces a high-gloss surface finish on printed parts. Total net weight across the pack is 5 kilograms. Each spool is vacuum sealed with desiccant to limit moisture absorption.

Dimensional control and spool geometry

The filament is held to a tolerance of +/- .03 millimetre, which reduces diameter variation during extrusion. Spools measure 7.88 inches in diameter, 2.69 inches wide and have a 2.20 inch hub hole, matching common printer mounts. The material is described as 100 percent new high-purity PLA derived mainly from corn starch.

Temperature window and printer fit

Recommended nozzle temperature ranges from 200 to 220 degrees Celsius (392 to 428 degrees Fahrenheit). Compatibility is listed for a range of popular desktop printers including MakerBot, RepRap, Afinia, UP, Mendel, Flashforge, Solidoodle 2, Printrbot LC and MakerGear M2. Printers outside this list or requiring different filament diameters are not supported.

Privalumai

  • Five-colour silk PLA pack for vibrant prints
  • High-gloss formula gives outstanding shiny surface finish
  • Dimensional accuracy ± .03 mm for precise extrusion
  • Vacuum-sealed spools with desiccant protect against moisture
  • 75 mm diameter works with popular 3D printers

Specifikacijos

BrandPrintOxe
ModelPLA like SILK
TypeFilament

Klausimai apie šią prekę

Will the spool hub hole fit my printer's holder?

The hub hole diameter is 2.20 inches (5.59 cm), so check your holder's spec against that size.

What nozzle temperature range works best for this silk PLA?

Print between 200°C and 220°C (392°F to 428°F) for reliable extrusion and gloss finish.

How much moisture protection does the packaging give for daily printing?

Each spool is vacuum-sealed with desiccant inside the box to block humidity during storage and use.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.