暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Five spools of silk PLA filament in blue orange white red green

PrintOxe

PrintOxe PLA like SILK Filament 5 Pack 1.75mm 1Kg each +/- .03 mm 3D printers accessory

SKU CH-TC03-N19AA

Five-colour silk PLA filament pack totalling 5 kg with ± .03 mm accuracy for a glossy finish on most 1.75 mm printers

  • TypeFilament
  • Five-colour silk PLA pack for vibrant prints
  • High-gloss formula gives outstanding shiny surface finish
  • Dimensional accuracy ± .03 mm for precise extrusion
  • Vacuum-sealed spools with desiccant protect against moisture
  • 75 mm diameter works with popular 3D printers

Five-colour silk PLA bundle

This set supplies five 1 kilogram spools of 1.75 millimetre PLA filament in blue, orange, white, red and green. The silk formulation produces a high-gloss surface finish on printed parts. Total net weight across the pack is 5 kilograms. Each spool is vacuum sealed with desiccant to limit moisture absorption.

Dimensional control and spool geometry

The filament is held to a tolerance of +/- .03 millimetre, which reduces diameter variation during extrusion. Spools measure 7.88 inches in diameter, 2.69 inches wide and have a 2.20 inch hub hole, matching common printer mounts. The material is described as 100 percent new high-purity PLA derived mainly from corn starch.

Temperature window and printer fit

Recommended nozzle temperature ranges from 200 to 220 degrees Celsius (392 to 428 degrees Fahrenheit). Compatibility is listed for a range of popular desktop printers including MakerBot, RepRap, Afinia, UP, Mendel, Flashforge, Solidoodle 2, Printrbot LC and MakerGear M2. Printers outside this list or requiring different filament diameters are not supported.

特長

  • Five-colour silk PLA pack for vibrant prints
  • High-gloss formula gives outstanding shiny surface finish
  • Dimensional accuracy ± .03 mm for precise extrusion
  • Vacuum-sealed spools with desiccant protect against moisture
  • 75 mm diameter works with popular 3D printers

仕様

BrandPrintOxe
ModelPLA like SILK
TypeFilament

この商品に関する質問

Will the spool hub hole fit my printer's holder?

The hub hole diameter is 2.20 inches (5.59 cm), so check your holder's spec against that size.

What nozzle temperature range works best for this silk PLA?

Print between 200°C and 220°C (392°F to 428°F) for reliable extrusion and gloss finish.

How much moisture protection does the packaging give for daily printing?

Each spool is vacuum-sealed with desiccant inside the box to block humidity during storage and use.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。