نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Five spools of silk PLA filament in blue orange white red green

PrintOxe

PrintOxe PLA like SILK Filament 5 Pack 1.75mm 1Kg each +/- .03 mm 3D printers accessory

SKU CH-TC03-N19AA

Five-colour silk PLA filament pack totalling 5 kg with ± .03 mm accuracy for a glossy finish on most 1.75 mm printers

  • TypeFilament
  • Five-colour silk PLA pack for vibrant prints
  • High-gloss formula gives outstanding shiny surface finish
  • Dimensional accuracy ± .03 mm for precise extrusion
  • Vacuum-sealed spools with desiccant protect against moisture
  • 75 mm diameter works with popular 3D printers

Five-colour silk PLA bundle

This set supplies five 1 kilogram spools of 1.75 millimetre PLA filament in blue, orange, white, red and green. The silk formulation produces a high-gloss surface finish on printed parts. Total net weight across the pack is 5 kilograms. Each spool is vacuum sealed with desiccant to limit moisture absorption.

Dimensional control and spool geometry

The filament is held to a tolerance of +/- .03 millimetre, which reduces diameter variation during extrusion. Spools measure 7.88 inches in diameter, 2.69 inches wide and have a 2.20 inch hub hole, matching common printer mounts. The material is described as 100 percent new high-purity PLA derived mainly from corn starch.

Temperature window and printer fit

Recommended nozzle temperature ranges from 200 to 220 degrees Celsius (392 to 428 degrees Fahrenheit). Compatibility is listed for a range of popular desktop printers including MakerBot, RepRap, Afinia, UP, Mendel, Flashforge, Solidoodle 2, Printrbot LC and MakerGear M2. Printers outside this list or requiring different filament diameters are not supported.

أبرز المميزات

  • Five-colour silk PLA pack for vibrant prints
  • High-gloss formula gives outstanding shiny surface finish
  • Dimensional accuracy ± .03 mm for precise extrusion
  • Vacuum-sealed spools with desiccant protect against moisture
  • 75 mm diameter works with popular 3D printers

المواصفات

BrandPrintOxe
ModelPLA like SILK
TypeFilament

أسئلة حول هذا المنتج

Will the spool hub hole fit my printer's holder?

The hub hole diameter is 2.20 inches (5.59 cm), so check your holder's spec against that size.

What nozzle temperature range works best for this silk PLA?

Print between 200°C and 220°C (392°F to 428°F) for reliable extrusion and gloss finish.

How much moisture protection does the packaging give for daily printing?

Each spool is vacuum-sealed with desiccant inside the box to block humidity during storage and use.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.