Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Five spools of silk PLA filament in blue orange white red green

PrintOxe

PrintOxe PLA like SILK Filament 5 Pack 1.75mm 1Kg each +/- .03 mm 3D printers accessory

SKU CH-TC03-N19AA

Five-colour silk PLA filament pack totalling 5 kg with ± .03 mm accuracy for a glossy finish on most 1.75 mm printers

  • TypeFilament
  • Five-colour silk PLA pack for vibrant prints
  • High-gloss formula gives outstanding shiny surface finish
  • Dimensional accuracy ± .03 mm for precise extrusion
  • Vacuum-sealed spools with desiccant protect against moisture
  • 75 mm diameter works with popular 3D printers

Five-colour silk PLA bundle

This set supplies five 1 kilogram spools of 1.75 millimetre PLA filament in blue, orange, white, red and green. The silk formulation produces a high-gloss surface finish on printed parts. Total net weight across the pack is 5 kilograms. Each spool is vacuum sealed with desiccant to limit moisture absorption.

Dimensional control and spool geometry

The filament is held to a tolerance of +/- .03 millimetre, which reduces diameter variation during extrusion. Spools measure 7.88 inches in diameter, 2.69 inches wide and have a 2.20 inch hub hole, matching common printer mounts. The material is described as 100 percent new high-purity PLA derived mainly from corn starch.

Temperature window and printer fit

Recommended nozzle temperature ranges from 200 to 220 degrees Celsius (392 to 428 degrees Fahrenheit). Compatibility is listed for a range of popular desktop printers including MakerBot, RepRap, Afinia, UP, Mendel, Flashforge, Solidoodle 2, Printrbot LC and MakerGear M2. Printers outside this list or requiring different filament diameters are not supported.

Pluspunten

  • Five-colour silk PLA pack for vibrant prints
  • High-gloss formula gives outstanding shiny surface finish
  • Dimensional accuracy ± .03 mm for precise extrusion
  • Vacuum-sealed spools with desiccant protect against moisture
  • 75 mm diameter works with popular 3D printers

Specificaties

BrandPrintOxe
ModelPLA like SILK
TypeFilament

Vragen over dit artikel

Will the spool hub hole fit my printer's holder?

The hub hole diameter is 2.20 inches (5.59 cm), so check your holder's spec against that size.

What nozzle temperature range works best for this silk PLA?

Print between 200°C and 220°C (392°F to 428°F) for reliable extrusion and gloss finish.

How much moisture protection does the packaging give for daily printing?

Each spool is vacuum-sealed with desiccant inside the box to block humidity during storage and use.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.