STARTECH BRACKET 3.5" to 5.25" Drive Adapter Bracket ssd accessory
- Black
- 1 x 3.5" Drive to 5…
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
STARTECH
Mounts two 2.5 inch SATA drives in one 3.5 inch bay with tool-free installation
Model 2 x 2.5in (Tool-less)
Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.
Option 1 x 3.5in
The StarTech BRACKET225PT adapter fits two 2.5″ SATA solid-state drives or hard drives into a single 3.5″ bay. It accepts drives from 5 mm to 12.5 mm thick and uses a tool-free design for quick installation. The bracket is intended for desktop builders who need extra storage without sacrificing an additional bay.
Data transfer speed is bound by the SATA revision supported by the drive and the host controller. The bracket itself adds no protocol overhead but cannot exceed the bandwidth of the slowest link in the chain. Builders using older SATA I ports will see reduced throughput compared with SATA III connections.
Verify that the chassis has a free 3.5″ bay with enough depth for the bracket and both drives. Confirm each 2.5″ drive measures between 5 mm and 12.5 mm in height; thicker drives will not fit. Ensure the motherboard or controller provides two SATA data ports and the power supply has two SATA power connectors.
| Brand | StarTech.com |
|---|---|
| Model | BRACKET225PT |
| Color | Black |
| Conversion Tray | 2 x 2.5" Drive to 3.5" Bay |
| Mobile Rack Drives Support | Multi 2.5" Drives to 3.5" Bay |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Multiple Drives |
| Compatible Products | 2.5" |
| Specifications | Compatible Drive Types (Type and Rate): SATA & IDE Drive Installation: Fixed Drive Size: 2.5in Number of 2.5 inch bays 2 Supported Drive Height(s): 5mm 7mm 9.5mm 12.5mm |
| Features | Install two 2.5” solid-state drives or hard drives into a single 3.5” bay in a desktop computer Tool-free 2-drive adapter bracket 2-bay 2.5" to 3.5" SATA SSD/HDD Converter Adapter Supports 2.5in drives 5mm to 12.5 mm in height SATA I/II/III |
| Siuntos svoris | 0.09 kg |
| Pakuotės dydis | 142 × 107 × 36 mm |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
The BRACKET225PT is the dual version and holds two 2.5in drives in one 3.5in bay.
You can slide each 2.5in drive into the bracket and secure it without screws, then mount the bracket in the 3.5in bay.
The bracket passes through the native SATA link so each drive runs at its own rated SATA I, II or III speed.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?