STARTECH BRACKET 3.5" to 5.25" Drive Adapter Bracket ssd accessory
- Black
- 1 x 3.5" Drive to 5…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
STARTECH
Mounts two 2.5 inch SATA drives in one 3.5 inch bay with tool-free installation
Model 2 x 2.5in (Tool-less)
Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.
Option 1 x 3.5in
The StarTech BRACKET225PT adapter fits two 2.5″ SATA solid-state drives or hard drives into a single 3.5″ bay. It accepts drives from 5 mm to 12.5 mm thick and uses a tool-free design for quick installation. The bracket is intended for desktop builders who need extra storage without sacrificing an additional bay.
Data transfer speed is bound by the SATA revision supported by the drive and the host controller. The bracket itself adds no protocol overhead but cannot exceed the bandwidth of the slowest link in the chain. Builders using older SATA I ports will see reduced throughput compared with SATA III connections.
Verify that the chassis has a free 3.5″ bay with enough depth for the bracket and both drives. Confirm each 2.5″ drive measures between 5 mm and 12.5 mm in height; thicker drives will not fit. Ensure the motherboard or controller provides two SATA data ports and the power supply has two SATA power connectors.
| Brand | StarTech.com |
|---|---|
| Model | BRACKET225PT |
| Color | Black |
| Conversion Tray | 2 x 2.5" Drive to 3.5" Bay |
| Mobile Rack Drives Support | Multi 2.5" Drives to 3.5" Bay |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Multiple Drives |
| Compatible Products | 2.5" |
| Specifications | Compatible Drive Types (Type and Rate): SATA & IDE Drive Installation: Fixed Drive Size: 2.5in Number of 2.5 inch bays 2 Supported Drive Height(s): 5mm 7mm 9.5mm 12.5mm |
| Features | Install two 2.5” solid-state drives or hard drives into a single 3.5” bay in a desktop computer Tool-free 2-drive adapter bracket 2-bay 2.5" to 3.5" SATA SSD/HDD Converter Adapter Supports 2.5in drives 5mm to 12.5 mm in height SATA I/II/III |
| Sūtījuma svars | 0.09 kg |
| Sūtījuma izmēri | 142 × 107 × 36 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The BRACKET225PT is the dual version and holds two 2.5in drives in one 3.5in bay.
You can slide each 2.5in drive into the bracket and secure it without screws, then mount the bracket in the 3.5in bay.
The bracket passes through the native SATA link so each drive runs at its own rated SATA I, II or III speed.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?