OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
4GB DDR4 2400MHz desktop DIMM module running at 1.20V for AMD and Intel systems
This 4GB DDR4 2400MHz PC4-19200 DIMM is built for desktop computers that need a straightforward memory upgrade. It fits standard 288-pin slots and runs at the JEDEC-standard 1.2V, making it a direct replacement for the Hynix HMA451U6AFR8N-UH module. The single-rank 1Rx8 layout keeps installation simple for home users and system integrators alike. Builders who need more than 4GB per slot or who require ECC error correction should look elsewhere.
The decisive specification is the tested 2400MHz frequency at 1.20V, which determines whether the module matches the motherboard's supported memory profile. If the board only accepts lower speeds or different voltages, this stick will not operate as intended. No other timing or latency figures are supplied, so compatibility rests entirely on this speed and voltage match.
Every module undergoes quality-assurance testing before it ships, which reduces the chance of early failures during installation. A lifetime warranty covers the part for as long as you own it, and US-based technical support is available before, during, and after the purchase to help with compatibility checks or troubleshooting. No additional software or accessories are bundled with the memory.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module uses the standard 288-pin DIMM form factor and runs at 1.20 V, which matches the DDR4 specification used by most desktop boards. Check your motherboard manual to confirm it supports DDR4 2400 non-ECC unbuffered memory.
Yes, provided your board has a free DDR4 DIMM slot and supports 4 GB modules. Mixing speeds is possible, but all modules will run at the speed of the slowest stick.
The product is listed as a compatible replacement for that exact Hynix part number, matching capacity, speed, voltage, and 1Rx8 organisation.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?