We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 4GB DDR4 2400MHz PC4-19200 1Rx8 Desktop RAM

SKU CH-TX1R-FKQ95

4GB DDR4 2400MHz desktop DIMM module running at 1.20V for AMD and Intel systems

  • Capacity4GB
  • SpeedDDR4 2400 (PC4 19200)
  • Tested Frequency2400
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • Boosts system responsiveness with 4GB DDR4 2400MHz capacity
  • Speeds up loading times using PC4-19200 rated frequency
  • Handles heavier workloads via 1Rx8 unbuffered DIMM design
  • Ensures stable operation at standard 1.20V DDR4 voltage
  • Fits desktop boards with 288-pin DDR4 slots

4GB DDR4 2400MHz Desktop Module

This 4GB DDR4 2400MHz PC4-19200 DIMM is built for desktop computers that need a straightforward memory upgrade. It fits standard 288-pin slots and runs at the JEDEC-standard 1.2V, making it a direct replacement for the Hynix HMA451U6AFR8N-UH module. The single-rank 1Rx8 layout keeps installation simple for home users and system integrators alike. Builders who need more than 4GB per slot or who require ECC error correction should look elsewhere.

Speed and Voltage Confirmation

The decisive specification is the tested 2400MHz frequency at 1.20V, which determines whether the module matches the motherboard's supported memory profile. If the board only accepts lower speeds or different voltages, this stick will not operate as intended. No other timing or latency figures are supplied, so compatibility rests entirely on this speed and voltage match.

Tested Reliability and Support

Every module undergoes quality-assurance testing before it ships, which reduces the chance of early failures during installation. A lifetime warranty covers the part for as long as you own it, and US-based technical support is available before, during, and after the purchase to help with compatibility checks or troubleshooting. No additional software or accessories are bundled with the memory.

Highlights

  • Boosts system responsiveness with 4GB DDR4 2400MHz capacity
  • Speeds up loading times using PC4-19200 rated frequency
  • Handles heavier workloads via 1Rx8 unbuffered DIMM design
  • Ensures stable operation at standard 1.20V DDR4 voltage
  • Fits desktop boards with 288-pin DDR4 slots

Specifications

BrandA-Tech
Capacity4GB
SpeedDDR4 2400 (PC4 19200)
Tested Frequency2400
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Questions about this item

Will this 4 GB DDR4 2400 MHz module fit my desktop motherboard?

The module uses the standard 288-pin DIMM form factor and runs at 1.20 V, which matches the DDR4 specification used by most desktop boards. Check your motherboard manual to confirm it supports DDR4 2400 non-ECC unbuffered memory.

Can I add this stick alongside the memory already installed?

Yes, provided your board has a free DDR4 DIMM slot and supports 4 GB modules. Mixing speeds is possible, but all modules will run at the speed of the slowest stick.

Is this the correct replacement for a Hynix HMA451U6AFR8N-UH module?

The product is listed as a compatible replacement for that exact Hynix part number, matching capacity, speed, voltage, and 1Rx8 organisation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.