OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
A-Tech
4GB DDR4 2400MHz desktop DIMM module running at 1.20V for AMD and Intel systems
This 4GB DDR4 2400MHz PC4-19200 DIMM is built for desktop computers that need a straightforward memory upgrade. It fits standard 288-pin slots and runs at the JEDEC-standard 1.2V, making it a direct replacement for the Hynix HMA451U6AFR8N-UH module. The single-rank 1Rx8 layout keeps installation simple for home users and system integrators alike. Builders who need more than 4GB per slot or who require ECC error correction should look elsewhere.
The decisive specification is the tested 2400MHz frequency at 1.20V, which determines whether the module matches the motherboard's supported memory profile. If the board only accepts lower speeds or different voltages, this stick will not operate as intended. No other timing or latency figures are supplied, so compatibility rests entirely on this speed and voltage match.
Every module undergoes quality-assurance testing before it ships, which reduces the chance of early failures during installation. A lifetime warranty covers the part for as long as you own it, and US-based technical support is available before, during, and after the purchase to help with compatibility checks or troubleshooting. No additional software or accessories are bundled with the memory.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module uses the standard 288-pin DIMM form factor and runs at 1.20 V, which matches the DDR4 specification used by most desktop boards. Check your motherboard manual to confirm it supports DDR4 2400 non-ECC unbuffered memory.
Yes, provided your board has a free DDR4 DIMM slot and supports 4 GB modules. Mixing speeds is possible, but all modules will run at the speed of the slowest stick.
The product is listed as a compatible replacement for that exact Hynix part number, matching capacity, speed, voltage, and 1Rx8 organisation.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?