Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Dark wood colour PLA+ filament spool in sealed box

PrintOxe

PrintOxe PLA+ Pro Dark Wood 1.75mm 1Kg Filament 3D Printers Accessory

SKU CH-SRE0-9FKSA

Dark wood PLA+ filament with ±.03 mm accuracy for 1.75 mm FDM printers

  • TypeFilament
  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy ±0.03 mm ensures consistent extrusion
  • 75 mm diameter compatible with major FDM printers
  • PLA+ formulation gives extra strength and low shrinkage
  • Print temperature range 190 °C – 200 °C (374 °F – 392 °F)

PrintOxe PLA+ Pro Dark Wood Filament

This PrintOxe PLA+ Pro filament comes in a Dark Wood colour and is supplied as a 1.75 mm diameter spool with a net weight of 1 kilogram. The material is a high-purity PLA+ blend formulated for extra strength, lower shrinkage and strong layer adhesion. It is vacuum-sealed with desiccant to protect against moisture before use.

Makers using 1.75 mm FDM printers

The spool fits FDM printers that accept 1.75 mm filament and the listed hub dimensions. Users whose printers require a different filament diameter or a different spool hub size cannot use this product. The Dark Wood colour provides a specific aesthetic finish for decorative or functional parts.

Dimensional accuracy ±0.03 mm

The filament is manufactured to a dimensional accuracy of ±0.03 mm, which helps deliver consistent extrusion and a smooth surface finish. The recommended extrusion temperature range is 190 °C to 200 °C. This tolerance is the key specification that determines whether the filament will perform reliably in a given printer.

Priekšrocības

  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy ±0.03 mm ensures consistent extrusion
  • 75 mm diameter compatible with major FDM printers
  • PLA+ formulation gives extra strength and low shrinkage
  • Print temperature range 190 °C – 200 °C (374 °F – 392 °F)

Specifikācijas

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

Jautājumi par šo preci

How much heat does the 1.75 mm filament generate during long prints?

The filament itself does not generate heat; your printer's nozzle runs at 190°C - 200°C and the bed temperature depends on the printer model.

What printer hardware is required to use the 1.75 mm diameter spool?

Any FDM printer that accepts 1.75 mm filament and can reach a nozzle temperature of 190°C - 200°C will work with this spool.

Will the +/- 0.03 mm tolerance cause issues on an older printer with a worn drive gear?

The tight +/- 0.03 mm dimensional accuracy helps consistent feeding, but a worn drive gear may still slip regardless of filament tolerance.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.