Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Dark wood colour PLA+ filament spool in sealed box

PrintOxe

PrintOxe PLA+ Pro Dark Wood 1.75mm 1Kg Filament 3D Printers Accessory

SKU CH-SRE0-9FKSA

Dark wood PLA+ filament with ±.03 mm accuracy for 1.75 mm FDM printers

  • TypeFilament
  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy ±0.03 mm ensures consistent extrusion
  • 75 mm diameter compatible with major FDM printers
  • PLA+ formulation gives extra strength and low shrinkage
  • Print temperature range 190 °C – 200 °C (374 °F – 392 °F)

PrintOxe PLA+ Pro Dark Wood Filament

This PrintOxe PLA+ Pro filament comes in a Dark Wood colour and is supplied as a 1.75 mm diameter spool with a net weight of 1 kilogram. The material is a high-purity PLA+ blend formulated for extra strength, lower shrinkage and strong layer adhesion. It is vacuum-sealed with desiccant to protect against moisture before use.

Makers using 1.75 mm FDM printers

The spool fits FDM printers that accept 1.75 mm filament and the listed hub dimensions. Users whose printers require a different filament diameter or a different spool hub size cannot use this product. The Dark Wood colour provides a specific aesthetic finish for decorative or functional parts.

Dimensional accuracy ±0.03 mm

The filament is manufactured to a dimensional accuracy of ±0.03 mm, which helps deliver consistent extrusion and a smooth surface finish. The recommended extrusion temperature range is 190 °C to 200 °C. This tolerance is the key specification that determines whether the filament will perform reliably in a given printer.

Pluspunten

  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy ±0.03 mm ensures consistent extrusion
  • 75 mm diameter compatible with major FDM printers
  • PLA+ formulation gives extra strength and low shrinkage
  • Print temperature range 190 °C – 200 °C (374 °F – 392 °F)

Specificaties

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

Vragen over dit artikel

How much heat does the 1.75 mm filament generate during long prints?

The filament itself does not generate heat; your printer's nozzle runs at 190°C - 200°C and the bed temperature depends on the printer model.

What printer hardware is required to use the 1.75 mm diameter spool?

Any FDM printer that accepts 1.75 mm filament and can reach a nozzle temperature of 190°C - 200°C will work with this spool.

Will the +/- 0.03 mm tolerance cause issues on an older printer with a worn drive gear?

The tight +/- 0.03 mm dimensional accuracy helps consistent feeding, but a worn drive gear may still slip regardless of filament tolerance.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.