저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Dark wood colour PLA+ filament spool in sealed box

PrintOxe

PrintOxe PLA+ Pro Dark Wood 1.75mm 1Kg Filament 3D Printers Accessory

SKU CH-SRE0-9FKSA

Dark wood PLA+ filament with ±.03 mm accuracy for 1.75 mm FDM printers

  • TypeFilament
  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy ±0.03 mm ensures consistent extrusion
  • 75 mm diameter compatible with major FDM printers
  • PLA+ formulation gives extra strength and low shrinkage
  • Print temperature range 190 °C – 200 °C (374 °F – 392 °F)

PrintOxe PLA+ Pro Dark Wood Filament

This PrintOxe PLA+ Pro filament comes in a Dark Wood colour and is supplied as a 1.75 mm diameter spool with a net weight of 1 kilogram. The material is a high-purity PLA+ blend formulated for extra strength, lower shrinkage and strong layer adhesion. It is vacuum-sealed with desiccant to protect against moisture before use.

Makers using 1.75 mm FDM printers

The spool fits FDM printers that accept 1.75 mm filament and the listed hub dimensions. Users whose printers require a different filament diameter or a different spool hub size cannot use this product. The Dark Wood colour provides a specific aesthetic finish for decorative or functional parts.

Dimensional accuracy ±0.03 mm

The filament is manufactured to a dimensional accuracy of ±0.03 mm, which helps deliver consistent extrusion and a smooth surface finish. The recommended extrusion temperature range is 190 °C to 200 °C. This tolerance is the key specification that determines whether the filament will perform reliably in a given printer.

주요 특징

  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy ±0.03 mm ensures consistent extrusion
  • 75 mm diameter compatible with major FDM printers
  • PLA+ formulation gives extra strength and low shrinkage
  • Print temperature range 190 °C – 200 °C (374 °F – 392 °F)

사양

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

이 상품에 대한 질문

How much heat does the 1.75 mm filament generate during long prints?

The filament itself does not generate heat; your printer's nozzle runs at 190°C - 200°C and the bed temperature depends on the printer model.

What printer hardware is required to use the 1.75 mm diameter spool?

Any FDM printer that accepts 1.75 mm filament and can reach a nozzle temperature of 190°C - 200°C will work with this spool.

Will the +/- 0.03 mm tolerance cause issues on an older printer with a worn drive gear?

The tight +/- 0.03 mm dimensional accuracy helps consistent feeding, but a worn drive gear may still slip regardless of filament tolerance.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.