我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Dark wood colour PLA+ filament spool in sealed box

PrintOxe

PrintOxe PLA+ Pro Dark Wood 1.75mm 1Kg Filament 3D Printers Accessory

SKU CH-SRE0-9FKSA

Dark wood PLA+ filament with ±.03 mm accuracy for 1.75 mm FDM printers

  • TypeFilament
  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy ±0.03 mm ensures consistent extrusion
  • 75 mm diameter compatible with major FDM printers
  • PLA+ formulation gives extra strength and low shrinkage
  • Print temperature range 190 °C – 200 °C (374 °F – 392 °F)

PrintOxe PLA+ Pro Dark Wood Filament

This PrintOxe PLA+ Pro filament comes in a Dark Wood colour and is supplied as a 1.75 mm diameter spool with a net weight of 1 kilogram. The material is a high-purity PLA+ blend formulated for extra strength, lower shrinkage and strong layer adhesion. It is vacuum-sealed with desiccant to protect against moisture before use.

Makers using 1.75 mm FDM printers

The spool fits FDM printers that accept 1.75 mm filament and the listed hub dimensions. Users whose printers require a different filament diameter or a different spool hub size cannot use this product. The Dark Wood colour provides a specific aesthetic finish for decorative or functional parts.

Dimensional accuracy ±0.03 mm

The filament is manufactured to a dimensional accuracy of ±0.03 mm, which helps deliver consistent extrusion and a smooth surface finish. The recommended extrusion temperature range is 190 °C to 200 °C. This tolerance is the key specification that determines whether the filament will perform reliably in a given printer.

商品特色

  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy ±0.03 mm ensures consistent extrusion
  • 75 mm diameter compatible with major FDM printers
  • PLA+ formulation gives extra strength and low shrinkage
  • Print temperature range 190 °C – 200 °C (374 °F – 392 °F)

商品規格

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

商品問答

How much heat does the 1.75 mm filament generate during long prints?

The filament itself does not generate heat; your printer's nozzle runs at 190°C - 200°C and the bed temperature depends on the printer model.

What printer hardware is required to use the 1.75 mm diameter spool?

Any FDM printer that accepts 1.75 mm filament and can reach a nozzle temperature of 190°C - 200°C will work with this spool.

Will the +/- 0.03 mm tolerance cause issues on an older printer with a worn drive gear?

The tight +/- 0.03 mm dimensional accuracy helps consistent feeding, but a worn drive gear may still slip regardless of filament tolerance.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。