暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Dark wood colour PLA+ filament spool in sealed box

PrintOxe

PrintOxe PLA+ Pro Dark Wood 1.75mm 1Kg Filament 3D Printers Accessory

SKU CH-SRE0-9FKSA

Dark wood PLA+ filament with ±.03 mm accuracy for 1.75 mm FDM printers

  • TypeFilament
  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy ±0.03 mm ensures consistent extrusion
  • 75 mm diameter compatible with major FDM printers
  • PLA+ formulation gives extra strength and low shrinkage
  • Print temperature range 190 °C – 200 °C (374 °F – 392 °F)

PrintOxe PLA+ Pro Dark Wood Filament

This PrintOxe PLA+ Pro filament comes in a Dark Wood colour and is supplied as a 1.75 mm diameter spool with a net weight of 1 kilogram. The material is a high-purity PLA+ blend formulated for extra strength, lower shrinkage and strong layer adhesion. It is vacuum-sealed with desiccant to protect against moisture before use.

Makers using 1.75 mm FDM printers

The spool fits FDM printers that accept 1.75 mm filament and the listed hub dimensions. Users whose printers require a different filament diameter or a different spool hub size cannot use this product. The Dark Wood colour provides a specific aesthetic finish for decorative or functional parts.

Dimensional accuracy ±0.03 mm

The filament is manufactured to a dimensional accuracy of ±0.03 mm, which helps deliver consistent extrusion and a smooth surface finish. The recommended extrusion temperature range is 190 °C to 200 °C. This tolerance is the key specification that determines whether the filament will perform reliably in a given printer.

特長

  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • Dimensional accuracy ±0.03 mm ensures consistent extrusion
  • 75 mm diameter compatible with major FDM printers
  • PLA+ formulation gives extra strength and low shrinkage
  • Print temperature range 190 °C – 200 °C (374 °F – 392 °F)

仕様

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

この商品に関する質問

How much heat does the 1.75 mm filament generate during long prints?

The filament itself does not generate heat; your printer's nozzle runs at 190°C - 200°C and the bed temperature depends on the printer model.

What printer hardware is required to use the 1.75 mm diameter spool?

Any FDM printer that accepts 1.75 mm filament and can reach a nozzle temperature of 190°C - 200°C will work with this spool.

Will the +/- 0.03 mm tolerance cause issues on an older printer with a worn drive gear?

The tight +/- 0.03 mm dimensional accuracy helps consistent feeding, but a worn drive gear may still slip regardless of filament tolerance.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。