Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Beige 80mm square case fan, 25mm thick, three wires

Zyvpee

Zyvpee JF0825B2HSAR 80mm 25mm 24V 0.15A 3-wire case fan

SKU CH-C66V-4981W

An 80 mm by 25 mm case fan with ball bearing runs on 24 V at 0.15 A using a three-wire connector for inverter cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBeige / Brown
  • LEDNon-LED
  • Featuresinverter Cooling
  • 24 V operation suits industrial and server chassis
  • Ball bearing construction extends service life
  • 80 mm frame fits standard mounting holes
  • 25 mm thickness clears tight clearances
  • Three-wire connector enables speed monitoring

Zyvpee 80 mm 24 V Case Fan

This 80 mm case fan runs on 24 V DC and draws 0.15 A through a three-wire connector. It uses a ball bearing and is built in a beige and brown frame. The unit is designed for inverter cooling in server or workstation environments.

Suited for 24 V Server Cooling

Technicians maintaining equipment that provides a 24 V fan header will find this fan a direct fit. Builders whose chassis or controller only supplies lower voltages cannot use this model without additional hardware. The non-LED design keeps the installation visually neutral.

24 V 0.15 A Three-Wire Power Specification

The 24 V, 0.15 A rating and three-wire interface are the critical parameters for compatibility. Verify that your system delivers exactly this voltage and connector type before purchase. Mismatched power will prevent the fan from operating.

Priekšrocības

  • 24 V operation suits industrial and server chassis
  • Ball bearing construction extends service life
  • 80 mm frame fits standard mounting holes
  • 25 mm thickness clears tight clearances
  • Three-wire connector enables speed monitoring

Specifikācijas

Brand3ccooler.com
SeriesJF0825B2HSAR
ModelJF0825B2HSAR
TypeCase Fan
Bearing TypeBall
Power Connector3 Wires
ColorBeige / Brown
LEDNon-LED
Featuresinverter Cooling
Dimensions80*25mm

Jautājumi par šo preci

What voltage and current does the 3-wire connector on the JF0825B2HSAR require?

The fan runs on 24V and draws .15A through its three-wire lead, so the header or supply must provide that exact voltage and current.

Will the 80mm by 25mm frame fit a standard 8025 mounting pattern?

Yes — the housing measures 80 by 25mm, matching the common 8025 screw-hole spacing used on many server and inverter chassis.

How do I connect the three wires correctly, and what mistake should I avoid?

Match the three leads to the corresponding pins on a 24V three-pin header; the common error is reversing the tachometer and ground wires, which stops speed reporting.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.