نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Beige 80mm square case fan, 25mm thick, three wires

Zyvpee

Zyvpee JF0825B2HSAR 80mm 25mm 24V 0.15A 3-wire case fan

SKU CH-C66V-4981W

An 80 mm by 25 mm case fan with ball bearing runs on 24 V at 0.15 A using a three-wire connector for inverter cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBeige / Brown
  • LEDNon-LED
  • Featuresinverter Cooling
  • 24 V operation suits industrial and server chassis
  • Ball bearing construction extends service life
  • 80 mm frame fits standard mounting holes
  • 25 mm thickness clears tight clearances
  • Three-wire connector enables speed monitoring

Zyvpee 80 mm 24 V Case Fan

This 80 mm case fan runs on 24 V DC and draws 0.15 A through a three-wire connector. It uses a ball bearing and is built in a beige and brown frame. The unit is designed for inverter cooling in server or workstation environments.

Suited for 24 V Server Cooling

Technicians maintaining equipment that provides a 24 V fan header will find this fan a direct fit. Builders whose chassis or controller only supplies lower voltages cannot use this model without additional hardware. The non-LED design keeps the installation visually neutral.

24 V 0.15 A Three-Wire Power Specification

The 24 V, 0.15 A rating and three-wire interface are the critical parameters for compatibility. Verify that your system delivers exactly this voltage and connector type before purchase. Mismatched power will prevent the fan from operating.

أبرز المميزات

  • 24 V operation suits industrial and server chassis
  • Ball bearing construction extends service life
  • 80 mm frame fits standard mounting holes
  • 25 mm thickness clears tight clearances
  • Three-wire connector enables speed monitoring

المواصفات

Brand3ccooler.com
SeriesJF0825B2HSAR
ModelJF0825B2HSAR
TypeCase Fan
Bearing TypeBall
Power Connector3 Wires
ColorBeige / Brown
LEDNon-LED
Featuresinverter Cooling
Dimensions80*25mm

أسئلة حول هذا المنتج

What voltage and current does the 3-wire connector on the JF0825B2HSAR require?

The fan runs on 24V and draws .15A through its three-wire lead, so the header or supply must provide that exact voltage and current.

Will the 80mm by 25mm frame fit a standard 8025 mounting pattern?

Yes — the housing measures 80 by 25mm, matching the common 8025 screw-hole spacing used on many server and inverter chassis.

How do I connect the three wires correctly, and what mistake should I avoid?

Match the three leads to the corresponding pins on a 24V three-pin header; the common error is reversing the tachometer and ground wires, which stops speed reporting.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.