Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Beige 80mm square case fan, 25mm thick, three wires

Zyvpee

Zyvpee JF0825B2HSAR 80mm 25mm 24V 0.15A 3-wire case fan

SKU CH-C66V-4981W

An 80 mm by 25 mm case fan with ball bearing runs on 24 V at 0.15 A using a three-wire connector for inverter cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBeige / Brown
  • LEDNon-LED
  • Featuresinverter Cooling
  • 24 V operation suits industrial and server chassis
  • Ball bearing construction extends service life
  • 80 mm frame fits standard mounting holes
  • 25 mm thickness clears tight clearances
  • Three-wire connector enables speed monitoring

Zyvpee 80 mm 24 V Case Fan

This 80 mm case fan runs on 24 V DC and draws 0.15 A through a three-wire connector. It uses a ball bearing and is built in a beige and brown frame. The unit is designed for inverter cooling in server or workstation environments.

Suited for 24 V Server Cooling

Technicians maintaining equipment that provides a 24 V fan header will find this fan a direct fit. Builders whose chassis or controller only supplies lower voltages cannot use this model without additional hardware. The non-LED design keeps the installation visually neutral.

24 V 0.15 A Three-Wire Power Specification

The 24 V, 0.15 A rating and three-wire interface are the critical parameters for compatibility. Verify that your system delivers exactly this voltage and connector type before purchase. Mismatched power will prevent the fan from operating.

Punti di forza

  • 24 V operation suits industrial and server chassis
  • Ball bearing construction extends service life
  • 80 mm frame fits standard mounting holes
  • 25 mm thickness clears tight clearances
  • Three-wire connector enables speed monitoring

Caratteristiche tecniche

Brand3ccooler.com
SeriesJF0825B2HSAR
ModelJF0825B2HSAR
TypeCase Fan
Bearing TypeBall
Power Connector3 Wires
ColorBeige / Brown
LEDNon-LED
Featuresinverter Cooling
Dimensions80*25mm

Domande su questo articolo

What voltage and current does the 3-wire connector on the JF0825B2HSAR require?

The fan runs on 24V and draws .15A through its three-wire lead, so the header or supply must provide that exact voltage and current.

Will the 80mm by 25mm frame fit a standard 8025 mounting pattern?

Yes — the housing measures 80 by 25mm, matching the common 8025 screw-hole spacing used on many server and inverter chassis.

How do I connect the three wires correctly, and what mistake should I avoid?

Match the three leads to the corresponding pins on a 24V three-pin header; the common error is reversing the tachometer and ground wires, which stops speed reporting.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.