我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Beige 80mm square case fan, 25mm thick, three wires

Zyvpee

Zyvpee JF0825B2HSAR 80mm 25mm 24V 0.15A 3-wire case fan

SKU CH-C66V-4981W

An 80 mm by 25 mm case fan with ball bearing runs on 24 V at 0.15 A using a three-wire connector for inverter cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBeige / Brown
  • LEDNon-LED
  • Featuresinverter Cooling
  • 24 V operation suits industrial and server chassis
  • Ball bearing construction extends service life
  • 80 mm frame fits standard mounting holes
  • 25 mm thickness clears tight clearances
  • Three-wire connector enables speed monitoring

Zyvpee 80 mm 24 V Case Fan

This 80 mm case fan runs on 24 V DC and draws 0.15 A through a three-wire connector. It uses a ball bearing and is built in a beige and brown frame. The unit is designed for inverter cooling in server or workstation environments.

Suited for 24 V Server Cooling

Technicians maintaining equipment that provides a 24 V fan header will find this fan a direct fit. Builders whose chassis or controller only supplies lower voltages cannot use this model without additional hardware. The non-LED design keeps the installation visually neutral.

24 V 0.15 A Three-Wire Power Specification

The 24 V, 0.15 A rating and three-wire interface are the critical parameters for compatibility. Verify that your system delivers exactly this voltage and connector type before purchase. Mismatched power will prevent the fan from operating.

商品特色

  • 24 V operation suits industrial and server chassis
  • Ball bearing construction extends service life
  • 80 mm frame fits standard mounting holes
  • 25 mm thickness clears tight clearances
  • Three-wire connector enables speed monitoring

商品規格

Brand3ccooler.com
SeriesJF0825B2HSAR
ModelJF0825B2HSAR
TypeCase Fan
Bearing TypeBall
Power Connector3 Wires
ColorBeige / Brown
LEDNon-LED
Featuresinverter Cooling
Dimensions80*25mm

商品問答

What voltage and current does the 3-wire connector on the JF0825B2HSAR require?

The fan runs on 24V and draws .15A through its three-wire lead, so the header or supply must provide that exact voltage and current.

Will the 80mm by 25mm frame fit a standard 8025 mounting pattern?

Yes — the housing measures 80 by 25mm, matching the common 8025 screw-hole spacing used on many server and inverter chassis.

How do I connect the three wires correctly, and what mistake should I avoid?

Match the three leads to the corresponding pins on a 24V three-pin header; the common error is reversing the tachometer and ground wires, which stops speed reporting.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。