Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Rectangular silver power supply unit with fan grille, 249 by 250 by 48.5 mm, 3.2 kg

AFRNDK

AFRNDK APW9+ 3600W PSU 220-240V 10A 67dBA

SKU CH-3895-SGWES

3600 watt replacement power supply for Bitmain Antminer S17 and T17 series, 220 to 240 volt input, force-air cooled at 67 dBA

Options APW9+ PSU

Lihat 2 konfigurasi lagi

Versi yang dicoret wujud, tetapi tidak tersedia di sini.

  • Delivers 3600 W for Antminer S17 and T17 series
  • Operates on 220-240 V input at 50/60 Hz
  • Draws 10 A at full load for stable mining
  • Force-air cooling keeps unit at 67 dBA noise level
  • Compact 249 x 250 x 48.5 mm frame weighs 3.2 kg

Direct replacement for Antminer S17 series

This authentic APW9+ unit delivers 3600 watt output for Bitmain Antminer S17e, T17e, S17+ and T17+ models. It accepts 220 to 240 volt input at 50 or 60 hertz and draws 10 ampere. The supply is built as a drop-in spare for miners whose original unit has failed.

Sustained load behaviour

Force-air cooling moves heat through the 249 by 250 by 48.5 millimetre chassis while the miner runs continuously. Acoustic output sits at 67 dBA under full load. The 3.2 kilogramme weight reflects a dense internal layout designed for non-stop operation rather than short bursts.

Installation notes

The enclosure matches the original mounting points so the swap takes minutes with basic hand tools. Ensure the 220 to 240 volt circuit can provide 10 ampere before powering on. The main risk is connecting the unit to an undersized breaker or using cables rated below the required current.

Ciri-ciri utama

  • Delivers 3600 W for Antminer S17 and T17 series
  • Operates on 220-240 V input at 50/60 Hz
  • Draws 10 A at full load for stable mining
  • Force-air cooling keeps unit at 67 dBA noise level
  • Compact 249 x 250 x 48.5 mm frame weighs 3.2 kg

Spesifikasi

Belum ada spesifikasi diterbitkan untuk produk ini.

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How loud is the APW9+ when it runs continuously at full load?

The unit is rated at 67 dBA under forced-air cooling, so expect a noticeable but steady fan noise during 24/7 operation.

Which connectors or cables must I already have to install this PSU in an Antminer S17+?

The PSU uses the standard Bitmain edge-connector interface; you need the matching hash-board power cables and the control-board lead that come with the miner.

Will the APW9+ fit and power an older Antminer S17 without modification?

Yes — it is a direct 3600 W replacement for S17, T17, S17+ and T17+ models and shares the same 249 x 250 x 48.5 mm footprint.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.