Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

AFRNDK

AFRNDK iPollo G1 Mini 1.2GH/s with PSU mining hardware

SKU CH-6RZR-J6D6X

Compact Cuckatoo32/31 miner delivers 1.2 GH/s at 100 W with included PSU

  • Crypto AlgorithmCuckatoo32/31 Algorithm
  • Hashrate1.2GH/s
  • Power Consumption100

Options ipollo G1 Mini

Lihat 2 konfigurasi lagi

Versi yang dicoret wujud, tetapi tidak tersedia di sini.

  • Efficient Grin mining at 1.2 GH/s with only 100 W power draw
  • Compact 78×148×158 mm design weighs just 2.5 kg for easy home placement
  • Cuckatoo32/31 algorithm support also enables MWC mining at 4.2 G hashrate
  • Wired Ethernet link provides stable pool connectivity without wireless interference
  • Optimal operation at 30 °C keeps noise low and reliability high

Compact Cuckatoo32/31 Miner

The AFRNDK iPollo G1 Mini is a desktop-scale mining unit built for the Cuckatoo32 and Cuckatoo31 algorithms. It targets Grin and MWC networks with a rated hashrate of 1.2GH/s and an observed rate of 1.4Gp/s within a ten-percent tolerance. An integrated power supply and Ethernet link keep the setup simple for home deployment.

Practical Power And Thermal Limits

The device draws approximately 100 watts with a tolerance of plus ten percent, so a standard household circuit can support it without special wiring. Operating temperature is specified at 30 degrees Celsius, meaning adequate room ventilation is required to sustain continuous operation. The Ethernet connection provides the only data path, so a wired network port must be available at the install site.

Deciding Specification Hashrate

The effective hashrate of 1.4Gp/s with a ten-percent variance is the single figure that determines whether this unit meets a miner’s profitability threshold. At 100 watts the efficiency ratio follows directly from that hashrate, so buyers can calculate daily yield against electricity cost using only these two numbers. No other specification alters the economic outcome for Cuckatoo32/31 mining.

Ciri-ciri utama

  • Efficient Grin mining at 1.2 GH/s with only 100 W power draw
  • Compact 78×148×158 mm design weighs just 2.5 kg for easy home placement
  • Cuckatoo32/31 algorithm support also enables MWC mining at 4.2 G hashrate
  • Wired Ethernet link provides stable pool connectivity without wireless interference
  • Optimal operation at 30 °C keeps noise low and reliability high

Spesifikasi

BrandiPollo
SeriesG1
ModelG1 MINI
Crypto AlgorithmCuckatoo32/31 Algorithm
Hashrate1.2GH/s
Power Consumption100

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

What coins can this miner earn?

It targets Grin using the Cuckatoo32/31 algorithm at 1.4 Gp/s and is also compatible with MWC.

How much power does it draw from the wall?

Rated at 100 W with a tolerance of plus ten percent; the included PSU matches that load.

Will it fit on a desk and run quietly at home?

The chassis measures 78 by 148 by 158 mm and weighs 2.5 kg; optimal temperature is 30 °C for low-noise operation.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.