暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

AFRNDK

AFRNDK iPollo G1 Mini 1.2GH/s with PSU mining hardware

SKU CH-6RZR-J6D6X

Compact Cuckatoo32/31 miner delivers 1.2 GH/s at 100 W with included PSU

  • Crypto AlgorithmCuckatoo32/31 Algorithm
  • Hashrate1.2GH/s
  • Power Consumption100

Options ipollo G1 Mini

他に 2点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Efficient Grin mining at 1.2 GH/s with only 100 W power draw
  • Compact 78×148×158 mm design weighs just 2.5 kg for easy home placement
  • Cuckatoo32/31 algorithm support also enables MWC mining at 4.2 G hashrate
  • Wired Ethernet link provides stable pool connectivity without wireless interference
  • Optimal operation at 30 °C keeps noise low and reliability high

Compact Cuckatoo32/31 Miner

The AFRNDK iPollo G1 Mini is a desktop-scale mining unit built for the Cuckatoo32 and Cuckatoo31 algorithms. It targets Grin and MWC networks with a rated hashrate of 1.2GH/s and an observed rate of 1.4Gp/s within a ten-percent tolerance. An integrated power supply and Ethernet link keep the setup simple for home deployment.

Practical Power And Thermal Limits

The device draws approximately 100 watts with a tolerance of plus ten percent, so a standard household circuit can support it without special wiring. Operating temperature is specified at 30 degrees Celsius, meaning adequate room ventilation is required to sustain continuous operation. The Ethernet connection provides the only data path, so a wired network port must be available at the install site.

Deciding Specification Hashrate

The effective hashrate of 1.4Gp/s with a ten-percent variance is the single figure that determines whether this unit meets a miner’s profitability threshold. At 100 watts the efficiency ratio follows directly from that hashrate, so buyers can calculate daily yield against electricity cost using only these two numbers. No other specification alters the economic outcome for Cuckatoo32/31 mining.

特長

  • Efficient Grin mining at 1.2 GH/s with only 100 W power draw
  • Compact 78×148×158 mm design weighs just 2.5 kg for easy home placement
  • Cuckatoo32/31 algorithm support also enables MWC mining at 4.2 G hashrate
  • Wired Ethernet link provides stable pool connectivity without wireless interference
  • Optimal operation at 30 °C keeps noise low and reliability high

仕様

BrandiPollo
SeriesG1
ModelG1 MINI
Crypto AlgorithmCuckatoo32/31 Algorithm
Hashrate1.2GH/s
Power Consumption100

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What coins can this miner earn?

It targets Grin using the Cuckatoo32/31 algorithm at 1.4 Gp/s and is also compatible with MWC.

How much power does it draw from the wall?

Rated at 100 W with a tolerance of plus ten percent; the included PSU matches that load.

Will it fit on a desk and run quietly at home?

The chassis measures 78 by 148 by 158 mm and weighs 2.5 kg; optimal temperature is 30 °C for low-noise operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。