AFRNDK
AFRNDK iPollo G1 Mini 1.2GH/s with PSU mining hardware
Compact Cuckatoo32/31 miner delivers 1.2 GH/s at 100 W with included PSU
- Crypto AlgorithmCuckatoo32/31 Algorithm
- Hashrate1.2GH/s
- Power Consumption100
Options ipollo G1 Mini
- ipollo G1 Mini
- S9
- T17
- L3+
- A11 Pro
- L7
- 3300W PSU for Whatsminer
- APW9+ PSU
- APW12 PSU
- Q2S
- APW7 PSU
- ipollo B1L
عرض 2 تكوينات إضافية
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
- Efficient Grin mining at 1.2 GH/s with only 100 W power draw
- Compact 78×148×158 mm design weighs just 2.5 kg for easy home placement
- Cuckatoo32/31 algorithm support also enables MWC mining at 4.2 G hashrate
- Wired Ethernet link provides stable pool connectivity without wireless interference
- Optimal operation at 30 °C keeps noise low and reliability high
Compact Cuckatoo32/31 Miner
The AFRNDK iPollo G1 Mini is a desktop-scale mining unit built for the Cuckatoo32 and Cuckatoo31 algorithms. It targets Grin and MWC networks with a rated hashrate of 1.2GH/s and an observed rate of 1.4Gp/s within a ten-percent tolerance. An integrated power supply and Ethernet link keep the setup simple for home deployment.
Practical Power And Thermal Limits
The device draws approximately 100 watts with a tolerance of plus ten percent, so a standard household circuit can support it without special wiring. Operating temperature is specified at 30 degrees Celsius, meaning adequate room ventilation is required to sustain continuous operation. The Ethernet connection provides the only data path, so a wired network port must be available at the install site.
Deciding Specification Hashrate
The effective hashrate of 1.4Gp/s with a ten-percent variance is the single figure that determines whether this unit meets a miner’s profitability threshold. At 100 watts the efficiency ratio follows directly from that hashrate, so buyers can calculate daily yield against electricity cost using only these two numbers. No other specification alters the economic outcome for Cuckatoo32/31 mining.
أبرز المميزات
- Efficient Grin mining at 1.2 GH/s with only 100 W power draw
- Compact 78×148×158 mm design weighs just 2.5 kg for easy home placement
- Cuckatoo32/31 algorithm support also enables MWC mining at 4.2 G hashrate
- Wired Ethernet link provides stable pool connectivity without wireless interference
- Optimal operation at 30 °C keeps noise low and reliability high
المواصفات
| Brand | iPollo |
|---|---|
| Series | G1 |
| Model | G1 MINI |
| Crypto Algorithm | Cuckatoo32/31 Algorithm |
| Hashrate | 1.2GH/s |
| Power Consumption | 100 |
إصدارات أخرى من هذا الطراز
5 أخرى من الفئة نفسها
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
أسئلة حول هذا المنتج
What coins can this miner earn?
It targets Grin using the Cuckatoo32/31 algorithm at 1.4 Gp/s and is also compatible with MWC.
How much power does it draw from the wall?
Rated at 100 W with a tolerance of plus ten percent; the included PSU matches that load.
Will it fit on a desk and run quietly at home?
The chassis measures 78 by 148 by 158 mm and weighs 2.5 kg; optimal temperature is 30 °C for low-noise operation.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Wadermoon PCI-E 1X to 4 PCI-E USB 3.0 expansion card
- PCI Express to USB…
- 4 Port
Orico PE20-1C 20 Gbps USB 3.2 Gen 2x2 Type-C PCIe x4 expansion card
- PCI Express to USB…
- 1x USB Port
OWC 16GB DDR4 2666MHz CL19 ECC SODIMM 1.2V laptop RAM
- 16GB (1 x 16GB)
- 260-Pin DDR4 SO-DIMM








