Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

G.SKILL

G.SKILL F3-2400C11Q-16GSR 16GB (4x4GB) DDR3 2400 CL11 desktop RAM

SKU CH-SS4N-Z3VV9 MPN F3-2400C11Q-16GSR

Quad-channel DDR3 2400 kit totals 16 GB with CL11 11-13-13-31 timings at 1.65 V and Intel XMP 1.3 profiles

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 2400 (PC3 19200)
  • CAS LatencyCL11
  • Timing11-13-13-31
  • Voltage1.65V
  • ECCNo

Capacity 16GB (4 x 4GB)

  • 16 GB quad-channel kit multiplies bandwidth for responsive multitasking
  • DDR3 2400 speed delivers up to 19.2 GB/s per channel throughput
  • CL11 11-13-13-31 timings provide low latency for snappy system response
  • Intel XMP 1.3 ready enables one-click profile overclocking in BIOS
  • Optimised for Core i7-3770K and i5-3570K on Z77 platform

Sniper Series DDR3 2400 Quad Kit

This G.SKILL Sniper Series kit delivers 16 GB of DDR3 memory in a matched set of four 4 GB modules. It runs at 2400 MHz with CL11 timings of 11-13-13-31 and operates at 1.65 V. Intel XMP 1.3 profiles are included for one-click setup on supported platforms.

Suits DDR3 quad-channel builds

Builders upgrading or repairing a quad-channel DDR3 system will appreciate the validated four-module kit and factory XMP profiles. Systems limited to dual-channel architecture or those requiring ECC or registered modules cannot use this unbuffered non-ECC kit. Anyone needing a different DDR generation or a lower voltage standard should look elsewhere.

1.65 V DDR3 voltage

The modules require 1.65 V to reach their rated 2400 MHz speed and CL11 timings. If the platform cannot supply this voltage the memory will not operate at its specified frequency and latency. Buyers must confirm that their motherboard and CPU memory controller support 1.65 V DDR3 before purchasing.

Ciri-ciri utama

  • 16 GB quad-channel kit multiplies bandwidth for responsive multitasking
  • DDR3 2400 speed delivers up to 19.2 GB/s per channel throughput
  • CL11 11-13-13-31 timings provide low latency for snappy system response
  • Intel XMP 1.3 ready enables one-click profile overclocking in BIOS
  • Optimised for Core i7-3770K and i5-3570K on Z77 platform

Spesifikasi

BrandG.SKILL
SeriesSniper Series
ModelF3-2400C11Q-16GSR
Capacity16GB (4 x 4GB)
SpeedDDR3 2400 (PC3 19200)
CAS LatencyCL11
Timing11-13-13-31
Voltage1.65V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
ColorBlack
FeaturesDesigned for 3rd Generation Intel Core Processors and Z77 platform.
Intel XMP 1.3 Ready for 3rd Generation Intel Core Processors.
Recommended Intel Core i7-3770K processors & Core i5-3570K processors for best performance.
Berat penghantaran0.18 kg
Dimensi bungkusan204 × 136 × 25 mm

Versi lain model ini

1 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Will this quad-channel kit run at 2400 MHz on a Z77 motherboard with an Intel Core i7-3770K?

Yes, the kit is rated for DDR3 2400 with CL11 11-13-13-31 timing at 1.65 V and includes an Intel XMP 1.3 profile for that platform.

What voltage do the modules require to reach the rated speed?

The modules are specified to operate at 1.65 V to achieve DDR3 2400 CL11 11-13-13-31 performance.

Does the kit contain four separate 4 GB sticks or two 8 GB sticks?

The kit contains four individual 4 GB modules for a total of 16 GB in a quad-channel configuration.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.