We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black DDR3 sticks with low-profile heat spreaders

G.SKILL

G.SKILL F3-2400C11Q-16GSR 16GB (4x4GB) DDR3 2400 CL11 desktop RAM

SKU CH-SS4N-Z3VV9 MPN F3-2400C11Q-16GSR

Quad-channel DDR3 2400 kit totals 16 GB with CL11 11-13-13-31 timings at 1.65 V and Intel XMP 1.3 profiles

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 2400 (PC3 19200)
  • CAS LatencyCL11
  • Timing11-13-13-31
  • Voltage1.65V
  • ECCNo

Capacity 16GB (4 x 4GB)

  • 16 GB quad-channel kit multiplies bandwidth for responsive multitasking
  • DDR3 2400 speed delivers up to 19.2 GB/s per channel throughput
  • CL11 11-13-13-31 timings provide low latency for snappy system response
  • Intel XMP 1.3 ready enables one-click profile overclocking in BIOS
  • Optimised for Core i7-3770K and i5-3570K on Z77 platform

Sniper Series DDR3 2400 Quad Kit

This G.SKILL Sniper Series kit delivers 16 GB of DDR3 memory in a matched set of four 4 GB modules. It runs at 2400 MHz with CL11 timings of 11-13-13-31 and operates at 1.65 V. Intel XMP 1.3 profiles are included for one-click setup on supported platforms.

Suits DDR3 quad-channel builds

Builders upgrading or repairing a quad-channel DDR3 system will appreciate the validated four-module kit and factory XMP profiles. Systems limited to dual-channel architecture or those requiring ECC or registered modules cannot use this unbuffered non-ECC kit. Anyone needing a different DDR generation or a lower voltage standard should look elsewhere.

1.65 V DDR3 voltage

The modules require 1.65 V to reach their rated 2400 MHz speed and CL11 timings. If the platform cannot supply this voltage the memory will not operate at its specified frequency and latency. Buyers must confirm that their motherboard and CPU memory controller support 1.65 V DDR3 before purchasing.

Highlights

  • 16 GB quad-channel kit multiplies bandwidth for responsive multitasking
  • DDR3 2400 speed delivers up to 19.2 GB/s per channel throughput
  • CL11 11-13-13-31 timings provide low latency for snappy system response
  • Intel XMP 1.3 ready enables one-click profile overclocking in BIOS
  • Optimised for Core i7-3770K and i5-3570K on Z77 platform

Specifications

BrandG.SKILL
SeriesSniper Series
ModelF3-2400C11Q-16GSR
Capacity16GB (4 x 4GB)
SpeedDDR3 2400 (PC3 19200)
CAS LatencyCL11
Timing11-13-13-31
Voltage1.65V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
ColorBlack
FeaturesDesigned for 3rd Generation Intel Core Processors and Z77 platform.
Intel XMP 1.3 Ready for 3rd Generation Intel Core Processors.
Recommended Intel Core i7-3770K processors & Core i5-3570K processors for best performance.
Shipping weight0.18 kg
Package size204 × 136 × 25 mm

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this quad-channel kit run at 2400 MHz on a Z77 motherboard with an Intel Core i7-3770K?

Yes, the kit is rated for DDR3 2400 with CL11 11-13-13-31 timing at 1.65 V and includes an Intel XMP 1.3 profile for that platform.

What voltage do the modules require to reach the rated speed?

The modules are specified to operate at 1.65 V to achieve DDR3 2400 CL11 11-13-13-31 performance.

Does the kit contain four separate 4 GB sticks or two 8 GB sticks?

The kit contains four individual 4 GB modules for a total of 16 GB in a quad-channel configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.