G.SKILL
G.SKILL F3-2400C11D-8GSR Sniper Series 8GB (2 x 4GB) DDR3 2400 CL11 desktop RAM
- 8GB (2 x 4GB)
- DDR3 2400 (PC3 1920…
US$ 36,99
0.00047604BTC
Op voorraad
G.SKILL
G.SKILL F3-2400C11Q-16GSR 16GB (4x4GB) DDR3 2400 CL11 desktop RAM
Quad-channel DDR3 2400 kit totals 16 GB with CL11 11-13-13-31 timings at 1.65 V and Intel XMP 1.3 profiles
- Capacity16GB (4 x 4GB)
- SpeedDDR3 2400 (PC3 19200)
- CAS LatencyCL11
- Timing11-13-13-31
- Voltage1.65V
- ECCNo
Capacity 16GB (4 x 4GB)
- 8GB (2 x 4GB)
- 16GB (4 x 4GB)
- 16 GB quad-channel kit multiplies bandwidth for responsive multitasking
- DDR3 2400 speed delivers up to 19.2 GB/s per channel throughput
- CL11 11-13-13-31 timings provide low latency for snappy system response
- Intel XMP 1.3 ready enables one-click profile overclocking in BIOS
- Optimised for Core i7-3770K and i5-3570K on Z77 platform
Sniper Series DDR3 2400 Quad Kit
This G.SKILL Sniper Series kit delivers 16 GB of DDR3 memory in a matched set of four 4 GB modules. It runs at 2400 MHz with CL11 timings of 11-13-13-31 and operates at 1.65 V. Intel XMP 1.3 profiles are included for one-click setup on supported platforms.
Suits DDR3 quad-channel builds
Builders upgrading or repairing a quad-channel DDR3 system will appreciate the validated four-module kit and factory XMP profiles. Systems limited to dual-channel architecture or those requiring ECC or registered modules cannot use this unbuffered non-ECC kit. Anyone needing a different DDR generation or a lower voltage standard should look elsewhere.
1.65 V DDR3 voltage
The modules require 1.65 V to reach their rated 2400 MHz speed and CL11 timings. If the platform cannot supply this voltage the memory will not operate at its specified frequency and latency. Buyers must confirm that their motherboard and CPU memory controller support 1.65 V DDR3 before purchasing.
Pluspunten
- 16 GB quad-channel kit multiplies bandwidth for responsive multitasking
- DDR3 2400 speed delivers up to 19.2 GB/s per channel throughput
- CL11 11-13-13-31 timings provide low latency for snappy system response
- Intel XMP 1.3 ready enables one-click profile overclocking in BIOS
- Optimised for Core i7-3770K and i5-3570K on Z77 platform
Specificaties
| Brand | G.SKILL |
|---|---|
| Series | Sniper Series |
| Model | F3-2400C11Q-16GSR |
| Capacity | 16GB (4 x 4GB) |
| Speed | DDR3 2400 (PC3 19200) |
| CAS Latency | CL11 |
| Timing | 11-13-13-31 |
| Voltage | 1.65V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Color | Black |
| Features | Designed for 3rd Generation Intel Core Processors and Z77 platform. Intel XMP 1.3 Ready for 3rd Generation Intel Core Processors. Recommended Intel Core i7-3770K processors & Core i5-3570K processors for best performance. |
| Verzendgewicht | 0.18 kg |
| Pakketafmetingen | 204 × 136 × 25 mm |
Andere versies van dit model
Nog 1 in dezelfde serie
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Vragen over dit artikel
Will this quad-channel kit run at 2400 MHz on a Z77 motherboard with an Intel Core i7-3770K?
Yes, the kit is rated for DDR3 2400 with CL11 11-13-13-31 timing at 1.65 V and includes an Intel XMP 1.3 profile for that platform.
What voltage do the modules require to reach the rated speed?
The modules are specified to operate at 1.65 V to achieve DDR3 2400 CL11 11-13-13-31 performance.
Does the kit contain four separate 4 GB sticks or two 8 GB sticks?
The kit contains four individual 4 GB modules for a total of 16 GB in a quad-channel configuration.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00276682BTC
Op voorraad
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00279256BTC
Op voorraad
