저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Four black DDR3 sticks with low-profile heat spreaders

G.SKILL

G.SKILL F3-2400C11Q-16GSR 16GB (4x4GB) DDR3 2400 CL11 desktop RAM

SKU CH-SS4N-Z3VV9 MPN F3-2400C11Q-16GSR

Quad-channel DDR3 2400 kit totals 16 GB with CL11 11-13-13-31 timings at 1.65 V and Intel XMP 1.3 profiles

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 2400 (PC3 19200)
  • CAS LatencyCL11
  • Timing11-13-13-31
  • Voltage1.65V
  • ECCNo

Capacity 16GB (4 x 4GB)

  • 16 GB quad-channel kit multiplies bandwidth for responsive multitasking
  • DDR3 2400 speed delivers up to 19.2 GB/s per channel throughput
  • CL11 11-13-13-31 timings provide low latency for snappy system response
  • Intel XMP 1.3 ready enables one-click profile overclocking in BIOS
  • Optimised for Core i7-3770K and i5-3570K on Z77 platform

Sniper Series DDR3 2400 Quad Kit

This G.SKILL Sniper Series kit delivers 16 GB of DDR3 memory in a matched set of four 4 GB modules. It runs at 2400 MHz with CL11 timings of 11-13-13-31 and operates at 1.65 V. Intel XMP 1.3 profiles are included for one-click setup on supported platforms.

Suits DDR3 quad-channel builds

Builders upgrading or repairing a quad-channel DDR3 system will appreciate the validated four-module kit and factory XMP profiles. Systems limited to dual-channel architecture or those requiring ECC or registered modules cannot use this unbuffered non-ECC kit. Anyone needing a different DDR generation or a lower voltage standard should look elsewhere.

1.65 V DDR3 voltage

The modules require 1.65 V to reach their rated 2400 MHz speed and CL11 timings. If the platform cannot supply this voltage the memory will not operate at its specified frequency and latency. Buyers must confirm that their motherboard and CPU memory controller support 1.65 V DDR3 before purchasing.

주요 특징

  • 16 GB quad-channel kit multiplies bandwidth for responsive multitasking
  • DDR3 2400 speed delivers up to 19.2 GB/s per channel throughput
  • CL11 11-13-13-31 timings provide low latency for snappy system response
  • Intel XMP 1.3 ready enables one-click profile overclocking in BIOS
  • Optimised for Core i7-3770K and i5-3570K on Z77 platform

사양

BrandG.SKILL
SeriesSniper Series
ModelF3-2400C11Q-16GSR
Capacity16GB (4 x 4GB)
SpeedDDR3 2400 (PC3 19200)
CAS LatencyCL11
Timing11-13-13-31
Voltage1.65V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
ColorBlack
FeaturesDesigned for 3rd Generation Intel Core Processors and Z77 platform.
Intel XMP 1.3 Ready for 3rd Generation Intel Core Processors.
Recommended Intel Core i7-3770K processors & Core i5-3570K processors for best performance.
배송 무게0.18 kg
포장 크기204 × 136 × 25 mm

이 모델의 다른 버전

같은 라인업에서 1개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will this quad-channel kit run at 2400 MHz on a Z77 motherboard with an Intel Core i7-3770K?

Yes, the kit is rated for DDR3 2400 with CL11 11-13-13-31 timing at 1.65 V and includes an Intel XMP 1.3 profile for that platform.

What voltage do the modules require to reach the rated speed?

The modules are specified to operate at 1.65 V to achieve DDR3 2400 CL11 11-13-13-31 performance.

Does the kit contain four separate 4 GB sticks or two 8 GB sticks?

The kit contains four individual 4 GB modules for a total of 16 GB in a quad-channel configuration.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.