Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333MHz 204-Pin SODIMM POSIFLEX HC-1521P memory upgrade

SKU CH-26YV-0XF4M

A 4 GB DDR3 SODIMM module running at 1333 MHz, built for the POSIFLEX HC-1521P terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HC-1521P terminal compatibility
  • 4GB DDR3 1333MHz capacity boosts system responsiveness
  • Low 1.35V voltage reduces power consumption
  • 204-pin SODIMM form factor fits laptop slots
  • CL9 latency with 2Rx8 rank optimises throughput

NEMIX RAM 4GB DDR3 SODIMM for POSIFLEX HC-1521P

This NEMIX RAM module provides a 4GB DDR3 1333MHz memory upgrade built specifically for the POSIFLEX HC-1521P high-end touch screen infotainment terminal. It uses a 204-pin SODIMM form factor with non-ECC unbuffered architecture.

Suits POS terminal maintenance, not general laptops

The module suits technicians servicing the named POSIFLEX terminal or identical OEM platforms requiring PC3-10600 2Rx8 chips at 1.35V or 1.50V operation. It is not for systems needing ECC error correction, registered buffering, higher capacities per slot, or different DDR generations.

204-pin DDR3 SODIMM interface decides fit

The single specification that decides compatibility is the 204-pin DDR3 SODIMM interface combined with the exact POSIFLEX HC-1521P system validation. Only terminals accepting this pin-out, voltage range, and rank configuration will accept the part.

Ciri-ciri utama

  • Designed for POSIFLEX HC-1521P terminal compatibility
  • 4GB DDR3 1333MHz capacity boosts system responsiveness
  • Low 1.35V voltage reduces power consumption
  • 204-pin SODIMM form factor fits laptop slots
  • CL9 latency with 2Rx8 rank optimises throughput

Spesifikasi

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Soalan tentang produk ini

Does my POSIFLEX HC-1521P terminal need a free 204-pin SODIMM slot to use this module?

Yes, the module is a 204-pin DDR3 SODIMM and requires an available SODIMM slot in the POSIFLEX HC-1521P to install.

Will this 1.35 V DDR3 SODIMM run reliably alongside existing 1.50 V DDR3 modules in the same system?

The module operates at 1.35 V while standard DDR3 runs at 1.50 V; the system will typically run all modules at the higher voltage, so mixing is usually stable but check the terminal's manual.

How can I confirm the module is running at DDR3 1333 (PC3-10600) with CL9 latency after installation?

Enter the system BIOS or use a tool like CPU-Z; the memory tab should show 1333 MHz speed, PC3-10600 rating and CL9 timings for the installed module.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.