BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277285BTC
Auf Lager
NEMIX RAM
NEMIX RAM 4GB DDR3 1333MHz 204-Pin SODIMM POSIFLEX HC-1521P memory upgrade
A 4 GB DDR3 SODIMM module running at 1333 MHz, built for the POSIFLEX HC-1521P terminal
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX HC-1521P terminal compatibility
- 4GB DDR3 1333MHz capacity boosts system responsiveness
- Low 1.35V voltage reduces power consumption
- 204-pin SODIMM form factor fits laptop slots
- CL9 latency with 2Rx8 rank optimises throughput
NEMIX RAM 4GB DDR3 SODIMM for POSIFLEX HC-1521P
This NEMIX RAM module provides a 4GB DDR3 1333MHz memory upgrade built specifically for the POSIFLEX HC-1521P high-end touch screen infotainment terminal. It uses a 204-pin SODIMM form factor with non-ECC unbuffered architecture.
Suits POS terminal maintenance, not general laptops
The module suits technicians servicing the named POSIFLEX terminal or identical OEM platforms requiring PC3-10600 2Rx8 chips at 1.35V or 1.50V operation. It is not for systems needing ECC error correction, registered buffering, higher capacities per slot, or different DDR generations.
204-pin DDR3 SODIMM interface decides fit
The single specification that decides compatibility is the 204-pin DDR3 SODIMM interface combined with the exact POSIFLEX HC-1521P system validation. Only terminals accepting this pin-out, voltage range, and rank configuration will accept the part.
Besonderheiten
- Designed for POSIFLEX HC-1521P terminal compatibility
- 4GB DDR3 1333MHz capacity boosts system responsiveness
- Low 1.35V voltage reduces power consumption
- 204-pin SODIMM form factor fits laptop slots
- CL9 latency with 2Rx8 rank optimises throughput
Technische Daten
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Fragen zu diesem Artikel
Does my POSIFLEX HC-1521P terminal need a free 204-pin SODIMM slot to use this module?
Yes, the module is a 204-pin DDR3 SODIMM and requires an available SODIMM slot in the POSIFLEX HC-1521P to install.
Will this 1.35 V DDR3 SODIMM run reliably alongside existing 1.50 V DDR3 modules in the same system?
The module operates at 1.35 V while standard DDR3 runs at 1.50 V; the system will typically run all modules at the higher voltage, so mixing is usually stable but check the terminal's manual.
How can I confirm the module is running at DDR3 1333 (PC3-10600) with CL9 latency after installation?
Enter the system BIOS or use a tool like CPU-Z; the memory tab should show 1333 MHz speed, PC3-10600 rating and CL9 timings for the installed module.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
